Lochinvar FTxl 500 Service Manual page 18

1
Service
Parameter table
Table 1-4 (continued from previous page) This table lists SMART SYSTEM control module parameters and where
to access them
Menu
Anti-cycling Time
Anti-cycling Override Differential
Ramp Delay (Enable/Disable)
Modulation Factor
Controlling Sensor(Outlet/System Supply/Inlet)
Cascade Address
IF Address = 0:
Maximum Cascade Outlet Set Point
Cascade Offset
Cascade Differential
Cascade Type (L/L, EFF)
Minimum On/Off Time
Minimum Next On Time
Minimum Pumps On
ELSE IF Address = 1:
Alternate Leader? (Y/N)
IF Yes:
Maximum Cascade Outlet Set Point
Cascade Offset
Cascade Differential
Cascade Type (L/L, Eff)
Minimum On/Off Time
Minimum Next On Time
Minimum Pumps On
Boiler Size
i. Cascade Address
ii. Type
iii. Input
BMS (Active, Inactive)
IF Active:
i. BMS Type (Power, Set Point)
IF Power:
1. Power at Minimum Volts
2. Power at Maximum Volts
ELSE:
1. Set Point at Minimum Volts
2. Set Point at Maximum Volts
ii. Minimum Volts
iii. Maximum Volts
iv. TStat Input (Active, Inactive)
IF Inactive:
1. On Volts
2. Off Differential Volts
ModBus/BACNet (Active, Inactive)
IF Active:
i. BAS Timeout
18
Description
Service Manual
See
User Access
Page
25 No
25 No
25 No
25 No
26 No
26 No
27 No
28 No
28 No
Installer
Access
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes