Grandstream Networks GXP1160 User Manual page 41

Enable 100rel
Caller ID Display
Use Privacy Header
Use P-Preferred-Identity
Header
Account x -> SIP Settings -> Advanced Features
Broadsoft Call Center
Hoteling Event
Call Center Status
Publish to Call Center
Feature Key
Synchronization
FIRMWARE VERSION 1.0.7.4
The use of the PRACK (Provisional Acknowledgment) method enables
reliability to SIP provisional responses (1xx series). This is very important in
order to support PSTN internetworking. To invoke a reliable provisional
response, the 100rel tag is appended to the value of the required header of the
initial signaling messages.
When set to "Auto", the phone will look for the caller ID in the order of
P-Asserted Identity Header, Remote-Party-ID Header and From Header in the
incoming SIP INVITE. When set to "Disabled", all incoming calls are displayed
with "Unavailable". When set to "From Header", the phone will display the
caller ID based on the From Header in the incoming SIP INVITE. The default
setting is "Auto".
Controls whether the Privacy Header will present in the SIP INVITE message
or not. The default setting is "default": the Privacy Header will show in INVITE
unless "Huawei IMS" special feature is on. If set to "Yes", the Privacy Header
will always show in INVITE. If set to "No", the Privacy Header will not show in
INVITE.
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or
P-Preferred-Identity Header will show in INVITE unless "Huawei IMS" special
feature is on.
If set to "Yes", the P-Preferred-Identity Header will always show in INVITE.
If set to "No", the P-Preferred-Identity Header will not show in INVITE.
Default setting is "No". When set to "Yes", a soft key "BSCCenter" is displayed
on LCD. User can access different Broadsoft Call Center agent features via
this soft key. Please note that "Feature Key Synchronization" will be enabled
regardless of this setting.
Broadsoft Hoteling event feature. Default setting is "No". With "Hoteling Event"
enabled, user can access the Hoteling feature option by pressing the
"BSCCenter" soft key.
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
When set to "Yes", users could select "Away", "Online" or "Busy" from LCD
menu and publish it to call center. The default setting is "No".
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND, Call Forward features and Call Center Agent status can be
synchronized between Broadsoft server and phone. The default setting is
"Disabled".
GXP1160/GXP1165 USER MANUAL
not. The default setting is "default": the
Page 39 of 67