1. Manuals
  2. Brands
  3. minrray Manuals
  4. IP Camera
  5. UV910
  6. User manual

minrray UV910 User Manual

Hide thumbs Also See for UV910:
Table of Contents

Advertisement

Quick Links

Minrray UV910 (VHD-A910)
User Manual
www.Minrray.com | 1 800 486-5276
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UV910 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for minrray UV910

Summary of Contents for minrray UV910

  • Page 1 Minrray UV910 (VHD-A910) User Manual www.Minrray.com | 1 800 486-5276...

  • Page 2: Camera

    Preface: Thanks for using our HD video conference camera The manual introduce the function, installation and operation of the HD camera. Prior to installation and usage, please read the manual thoroughly. Warning This product can be only used in specified range in order to avoid to any damage or danger.

  • Page 3: Table Of Contents

    Contents 1. Notes………………………………………………………….3 2. Main Feature………………………………………………...4 3. Supplied Accessory………………………………………….5 4. Camera Interface Explanation………….......6 5. Remote Controller…………………………………………..7 6. Camera Function…………………………………………….8 7. Bottom Dial Switch………………………………………….9 8. Connection……………………………………………………10 9. VISCA RS-232 Pin Spcs……………………………………..12 10. Installation…………………………………………………...13 11. Operation…………………………………………………….15 12. Menu Setting…………………………………………………30 13. Maintains and Trouble Shooting……………………………35 14.

  • Page 4: Notes

    Notes: Electric Safety Installation and operation much accord with electric safety standard. Caution to transport Avoid stress, vibration and soakage in transport, storage and installation. Polarity of power supply he power supply of the product is 12VDC, the max electrical current is 2A. Polarity of the power supply is as following drawing Careful of installation Never move the camera by seizing the camera head.

  • Page 5: Main Feature

    Main Features: Real High Definition Video With 1/2.5 inch, 2.7 million pixel high quality HD CMOS transducer, to achieve 1920x1080 super high resolution video. 10x optical zoom Fast, accurate and stable auto focus lens, 10x optical zoom; F1.8-2.2 mechanical shutter. Wide range, high speed and low noise Pan/Tilt rotation Step motor driving, smooth rotation and user friendly without dithering.

  • Page 6: Supplied Accessory

    Supplied Accessories When you unpack, check that all the supplied accessories are included: Camera…………………………...1 AC power adaptor………………..1 AC power cable…………………...1 Remote controller………………...1 User manual………………………1 Double-side glue shim………..…4...

  • Page 7: Camera Interface Explanation

    Camera Interface Explanation Lens Main Camera Base Remote Controller Sensor Remote Controller Receiver RS232 controller serial interface CVBS SD Compound Video Output Interface (not available now) HD-SDI High Definition Serial Digital Signal interface HDMI High Definition Multi-Media Signal Interface YPbPr high definition components video signal DC12V Input Power Supply Jack Power Switch, On is open, OFF is close Power indicator light (red)

  • Page 8: Remote Controller

    Remote Controller: Definition of IR controller ① Number Key ② * Key ③ ＃ Key Run Preset: press 0-9 number key, clear preset: press＃＃＃to clear all preset ④ Zoom control key Zoom +: lens near Zoom -: lens far ⑤ Focus control key Focus+: from near to far Focus-：...

  • Page 9: Camera Function

    Camera Function It has 2 kinds of working modes. Two working modes can be controlled by IR remote controller and VISCA serial interface command. Normal working mode, camera can be controlled by remote controller and serial interface command. Lens parameter adjustment mode, it can adjust the lens parameter, but normally user rarely use.

  • Page 10: Bottom Dial Switch

    ● Multi-SD and HD video output 1, Standard definition video output: CVBS SD compound video signal output (unavailable now) 2, High definition digital video signal: HD-SDI high definition serial digital signal interface output uncompressed HD digital signal. 3, HDMI: High Definition digital video signal: Digital HD multi-media output uncompressed digital video signal.

  • Page 11: Connection

    Connection HD camera Interface explanation: ● Control interface RS-232 RS232 serial interface, wiring is standard VISCA cable, one of the linker is 8pin mini DIN(1), the other is RS232C 9 core square linker ( DB-9, DB-25), which connect with computer or conference TV terminal.
  • Page 12 ● HDMI High Definition Multi-Media Digital Signal High Definition Multi-Media Digital Signal interface output High Definition digital video signal ● High Definition Component Video Signal YPbPr HD component video signal interface output high definition component analog video signal. ● Power supply interface DC12V Input power supply is adopted external adapter to offer 12V/2A DC.

  • Page 13: Visca Rs-232 Pin Spcs

    VISCA RS-232 Pin Spcs HD camera Windows DB-9 1.DTR 1.CD 2.DSR 2.RXD 3.TXD 3.TXD 4.GND 4.DTR 5.RXD 5.GND 6.GND 6.DSR 7.RTS 8.NC 8.CTS 9.RI HD camera Windows DB-25 1.DTR 1.FG 2.DSR 2.TXD 3.TXD 3.RXD 4.GND 4.RTS 5.RXD 5.CTS 6.GND 6.DSR 7.GND 8.NC 20.DTR...

  • Page 14: Installation

    Installation Notes Do not grasp the camera head when carring the camera. Do not turn the camera head manually. Doing so will result in the camera malfunction. Installation and Application There are different installations for different environment: 1, on desk 2, on terminal equipment 3, on the tripod 4, hoisting by hoisting stents...
  • Page 15 Notes on use of the Remote Controller If the remote controller doesn’t work properly, change the batteries. If there are objects between the remote controller and the sense for the remote controller on the unit, the unit may not function properly, so point the remote controller directly at the sensors on the front of back of the unit when operating it.

  • Page 16: Operation

    Operation l Boot-Strap 1, Check whether the power wiring is corrects. 2, Set the power supply switch “ON” at the back of camera, power indicator light is red. 3, Camera initializes after 5 seconds: Rotate to the right limit, move to the down limit; Then turn left, motor stops when horizontal and vertical rotation is in the middle, camera lens will move to the wide angel position.
  • Page 17 Mode 1: press *+#+1 Mode 2: press *+#+2 Mode 3: press *+#+3 2 The working mode of the camera can also be set by terminal COM, the relative command can be seen in the COM command list. 3 Setting camera working mode by camera controller Note: By the camera controller, the camera can only be set to mode 0 and mode 3.
  • Page 18 2、 ZOOM OPERATION (put on reservation) ZOOM OUT: press “ZOOM -“ buttom ZOOM IN: press “ZOOM +” button Press these two keys for long time, zoom in and out can be executed continuously, and stop when you release. 3、 Focus control 4、...
  • Page 19 Pressing “SET PRESET” key and then press any number of 0-9 to set relative preset. (Notes: Total 10 Preset) 6、 Clear Preset Press “CLEAR PRESET” and press any number of 0-9 to clean relative preset. Press “＃” three times to cancel all preset.
  • Page 20 7、 Run Preset Press any number of 0-9 to run relative preset. If there is no preset to relative number, then invalid.. 8、 Video Output Mode Press * # F1: 1080i/60 Press * # F2: 720p/60 Press * # F3: 720p/30 Press * # F4: 1080p/30 Press * # : 1080p/25...
  • Page 21 9、 The command of controller control the setting of lens parameter. Setting: By pressing *+#+3, the camera will be switched to mode 3, then press the corresponding number key for multi times to set the different parameter. For example: to set noise reduction, Press *+#+3 to switch to mode 3, Then press number key 2 for once, that means the noise reduction will be setted as HIGH.
  • Page 22 White balance AUTO custom manual daylight cloudy shade FL white FL NORMAL FL daynight light bulb EV correction -2EV -1.66EV -1.33EV -1EV -0.66EV -0.33EV +0.33EV +0.66EV +1EV +1.33EV +1.66EV +2EV Metering light mode Center weighted Spot Evaluation COM Control In power-on working mode, camera can realize communication with video conferencing terminal by RS-232C；the baud rate of COM is 9600 bit/s, each frame data includes 1 start bit, 8 data bits and 1 stop bit.
  • Page 23 1. Inquiry Command Inquiry Command Command Massage Return Message Comments Inquiry RS232 a5 5a c3 FF aa bb cc FF connect Inquiry Version a5 5a c4 FF 90 50 20 09 the current version is 12 17 0b FF 20091217b, and it will 81 09 04 22 FF change according...
  • Page 24 2. Movement control command Movement Control Command Message Reply Comments Command Message Turn up 81 01 06 01 04 03 03 01 FF send rotate command Turn down 81 01 06 01 04 03 03 02 FF continuous Turn left 81 81 01 06 01 04 03 01 03FF rotate, and stop at stop command...
  • Page 25 3. Mode set command Mode Setting Command Reply Comments Massage Message Work Mode 0 a5 5a c0 FF aa bb cc FF Work Mode 1 a5 5a c1 FF aa bb cc FF Work Mode 2 a5 5a c2 FF aa bb cc FF Romote C5 5C C0 HH II JJ...
  • Page 26 flip Pan flip 81 01 04 66 04 FF Pan/tilt flip 81 01 04 66 05 FF No flip 81 01 04 66 03 FF Once the image flip is set, the camera can automatically memory. System reset 81 01 06 05 FF Initialize the pan/tilt and camera, command reset the DSP;...
  • Page 27 command a5 5a 04 02 0x 00 00 00 ff x = 0/1/2 x is the setting number MANNUAL expose mode command a5 5a 04 04 0x 00 00 00 ff x = 0/1/2/3 x is the setting number Diaphragm F1.8 Diaphragm F2.0 Diaphragm F2.8 Exposure mode...
  • Page 28 Manual ISO200 ISO400 ISO800 ISO1000 command a5 5a 04 0A 01 0x 00 00 ff x = 0/1/2/3/4/5 x is the setting number AUTO flicker reduction MANUAL command a5 5a 04 0c 0x 00 00 00 ff x = 0/1/2 x is the setting number 50Hz flicker reduction MANUAL...
  • Page 29 command a5 5a 06 0c 0x 00 00 00 ff x = 0/1/2 x is the setting number high Chroma KEY Middle command a5 5a 06 0c 00 0x 00 00 ff x = 0/1/2 x is the setting number Auto slow shutter command a5 5a 0a 06 0x 00 00 00 ff...
  • Page 30 00 exposure compensation off，01 exposure compensation on If exposure compensation on, the byte is the value of the exposure compensation 00——-2EV，01——-1.66EV，02——-1.33EV，03——-1EV， 04 — — -0.66EV ， 05 — — -0.33EV ， 06 — — 0EV ， 07 — — +0.33EV，08——+0.66EV, 09——+1EV，0A——+1.33EV， 0B——+1.66EV，0C——+2EV BLC ON BLC OFF...

  • Page 31: Menu Setting

    Menu setting Enter menu Using our remote control: press “menu” key Exit menu Using our remote control: Press “menu” key two times continuously By using the key of Up, Down, Left, Right, and HOME (the confirm key), users can choose different menu item, then set the camera parameter or see the current status of the camera.
  • Page 32 2.1 Diaphragm driven AE If you choose Diaphragm driven AE, there will be Diaphragm item, as follow pic: If you choose Diaphragm, press key, then you can set the Diaphragm to F1.8， F2.0， F2.8， F4.0， F5.6，F8.0 or F11 EXPOSURE MODE Diaphragm driven AE Diaphragm F1.8...
  • Page 33 3. BLACKLIGHT CORRECTION Enter the BACKLIGHT CORRECTION item by press the direction key and HOME key in the first menu, the available options are BACKLIGHT CORRECTION ON and OFF. it will be as follow pic: BACKLIGHT CORRECTION BACKLIGHT CORRECTION SELECT “MENU”...
  • Page 34 6. DIGITAL EFFECT Enter the DIGITAL EFFECT item by press the direction key and HOME key in the first menu. By this item, user can set the digital effect of the output image, like Normal ， Antique ， Monochrome， Posterization， Solerization， Nega. It will be as follow pic: DIGITAL EFFECT EFFECT...
  • Page 35 10. STATUS Enter the STATUS item by press the direction key and HOME key in the first menu. By this item, user can check the setting status of camera parameters. STATUS VIDEO FORMAT 1080I60 EXPOSURE MODE AUTO BACKLIGHT CORRECTION ISO SENSITIVITY AUTO WHITE BALANCE AUTO...

  • Page 36: Maintains And Trouble Shooting

    Maintenance and Troubleshooting Camera Maintains If camera is not used for long time, please turn off power switch, adapter switch and AC plug. Use soft cloth or tissue to clean the camera cover. Use soft cloth to clean the lens; Use neuter cleanser if bad smeared. No use strong or corrosive cleanser or corrosive cleanser avoiding scuffing.

  • Page 37: Specification

    1, Check the camera operation mode is right. 2, Check control wire is connected correctly. Specification 1. Camera and Lens features ● Video Transducer: 1/2.5 inch super quality HD CMOS transducer ● Image: Dynamic Image: 4:3 390,000 pixel 16:9 2.07 million pixel Static Image: 2.7 million pixel 16:9...
  • Page 38 ● High Definition Interface: HD standard interface ● High Definition Interface: HD-SDI ● High Definition Interface: YPbPr ● Controller Signal Interface: 8 core mini DIN ● Controller Signal Interface: Start bit: 1; Data bit: 8; Stop bit: 1; Baud Ratio: 9600bps ●...

  • Page 39: Dimension

    Dimension: (unit:MM)

Table of Contents