Normal Playback - Sanyo SRT-612DC Instruction Manual

NORMAL PLAYBACK

Normal Playback
1
Turn on the power to the VCR and TV monitor.
2
Load the video cassette tape.
3
Press the REC/PLAY SPEED button to select the
playback speed.
The selected playback speed is displayed on the
°
digital display.
NOTE:
•
A slow motion effect or accelerated playback effect
can be achieved by using a slower or faster
playback speed than the speed used for recording.
4
Press the PLAY button.
Playback starts.
°
If necessary, adjust the tracking to eliminate the
°
noise from the picture.
5
To stop playback, press the STOP button.
To advance or rewind the tape, press the FF or
°
REW button.
NOTES:
•
A tape recorded on another make of time lapse VCR
cannot be played back on this unit.
•
A tape recorded on this VCR cannot be played back on
another make of time lapse VCR.
Tracking Control
If there is noise in the image during playback,
1
While looking at the playback picture, press and hold
the TRACKING/V. STILL+ button to minimize the
noise.
2
If it cannot be minimized, press the TRACKING/V.
STILL– button.
Audio Playback
•
The playback speed has to be the same as the
recording speed, for normal playback of the audio.
20