Table of Contents
Advertisement
BASIC OPERATION
3
15
Loading
When a video cassette is inserted, it will be loaded
automatically
and the cassette-in (cm) indicator will
illuminate,
Auto
power on
The power is automatically
switched on as a cassette
is inserted while the VCR is in the stand-by mode,
Unloading
Power off eject
The video cassette will be ejected when the
~EJECT
button is pressed, even when the VCR is in
stand-by mode.
@
Erasure-prevention
tab
If the erasure-prevention
tab on the back of the video
cassette is removed, the cassette cannot be
recorded on,
This tab is designed
to prevent the accidental
erasure of recorded material.
To record onto the same cassette again, place two
layers of adhesive tape over the space where the tab
was, so as to cover the space completely.
Playback/Recording
duration
The recording
tape speed can be selected by
pressing the SP/LP button.
During playback, the tape speed cannot be
changed,
the playback speed will always match the
speed selected for recording.
Standard Play mode (SP):
Best image and sound
quality, No display
indicates SP mode.
Long Play mode (LP):
Twice the SP mode duration,
Before starting
Insert a recorded video cassette,
Turn on the TV then set it to the preset video
channel or AV mode.
Normal playback
Press the PLAY
button.
Auto play
The VCR will play back a tape automatically
when a
video cassette is inserted whose erasure-prevention
tab has been removed.
H
To stop the playback,
press the
STOP
button.
To rewind the tape, press the +REW
button.
To advance (fast-forward)
the tape, press the
FF PP
button,
Auto eject
When a video cassette without an erasure-prevention
tab is played to the end of the tape, the tape will be
automatically
rewound and then the cassette will be
ejected.
Advertisement
Table of Contents
