Special Playback - Sanyo SRT-612DC Instruction Manual

SPECIAL PLAYBACK

Picture Search
1
Press the FF (or REW) button, during normal
playback.
The image can be seen while the tape is
°
advanced (or rewound) at high speed.
2
To return to normal playback, press the PLAY button.
NOTES:
•
During picture search, noise (horizontal bars) will
appear in the picture.
•
The sound is muted.
Still Image
1
Press the PAUSE/SCAN button, during normal
playback.
A still image can be viewed.
°
2
To return to normal playback, press the PLAY button.
NOTES:
•
If still mode continues for 5 minutes or more, the VCR
will go into stop mode to avoid damaging the tape.
•
If the image is unstable (rolling vertically), adjust the
vertical lock control to correct.
Vertical Lock Control
During still image mode,
1
Press and hold the TRACKING/V. STILL+ button to
reduce the vertical rolling of the image.
2
If it cannot be corrected, press the TRACKING/V.
STILL– button.
Frame Advance
1
Press the FF button, during still image mode.
The still image is advanced of one image (field).
°
2
To return to normal playback, press the PLAY button.
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1
Press the PAUSE/SCAN button during stop mode.
"AL SCAN" will be displayed on screen.
°
2
Press the FF (or REW) button.
The unit will advance (or rewind) the tape at high
°
speed and playback the first 5 seconds of every
alarm recording.
To cancel the alarm scan mode, press the STOP
°
button.
3
While the desired recording is being played back,
press the PLAY button.
Playback will start, alarm scan mode is cancelled.
°
NOTE:
•
The alarm scan functions will only be possible if the
recording speed was set to 8-hour mode and the
recording duration to 20 seconds or more.
21