Test Strip - NIPRO Diagnostics True2go Owner's Booklet

Test Strip

① Contact End - Insert into Test Port with blocks
(contacts) facing up.
② Sample Tip - Bring sample (fresh, capillary or
venous blood or Glucose Control) to edge of Tip.
Note: Insert Strip into Meter before touching
Sample Tip to blood or Control drop.
Sample Placement
Correct Placement
• Allow sample (blood or Glucose Control drop)
to be drawn into Sample Tip until testing begins
(Dashes move across Display) .
Caution! Holding the Test Strip Sample Tip to the
blood sample too long after the Meter
begins testing may cause inaccurate results.
• Do not smear or scrape drop with Strip.
• Do not apply more sample to the Strip after
testing begins.
Note: Do not apply blood or Glucose Control to top
of Test Strip.
Do not insert Sample Tip with sample into
Meter for testing. May damage Meter.
Top of Test Strip
2
10
1
Incorrect Placement