Test Strip
Contact End - Insert into Meter with Contacts
(metallic blocks) facing up before adding sample.
Sample Tip - Touch sample (blood or Glucose
Control) to edge of Tip.
Placement of Sample to Test Strip
Correct
• Allow sample (blood or Glucose
Control drop) to be drawn into
Sample Tip.
Note: Do not apply blood or Glucose
Control to top of Test Strip.
• Do not smear or scrape drop with Strip.
• Do not apply more sample to Strip
after removing from drop.
Note: Do not insert Sample Tip with
sample into Meter for testing.
Front of Test Strip
1
Incorrect
10
2
Contacts
Face Up