System Specifications/Chemical Composition - NIPRO Diagnostics True2go Owner's Booklet

System Specifications
Result Range: 20-600 mg/dL
Sample Size: Minimum 0.5 microliter (0.5 µL)
Sample: Fresh capillary whole blood, venous blood drawn in
EDTA or heparin tubes, or Glucose Control
Test Time: Results in as little as 4 seconds
Result Value: Plasma equivalent values
Assay Method: Electrochemical
Power Supply: One 3V Lithium Battery
Battery Life: Approximately 1,500 tests or 2 years
Automatic shut-off: After two minutes of non-use
Weight: 0.6 ounces
Size: 1.70" x 1.46" x 0.89"
Memory Size: 99 glucose results
Operating Range
Relative Humidity: 10-90% (Non-condensing)
Temperature: 50-104ºF
Hematocrit: 20-60%
Note:
Use within specified environmental
conditions only.
Chemical Composition
Test Strips: Glucose dehydrogenase-PQQ (Acinetobacter
calcoaceticus), Mediators, Buffers and Stabilizers.
Glucose Control: Contents: Water, d-glucose, buffers,
viscosity enhancing agents, salts, dyes and preservatives.
#CR2032 (non-rechargeable)
Total power when active
at full battery = 8.6mW
(Meter & Test Strips):
33