General Information; Stopping The Engine; Specifications - Toro Groundsmaster
4000?D Service Manual

PRELIMINARY – For Toro Distributor and Toro Company use only.

General Information

This Chapter gives information about specifications and
repair of the diesel engine used in the Groundsmaster
4000−D.
General maintenance procedures are described in your
Operator's Manual. Information on engine troubleshoot-
ing, testing, disassembly and reassembly is identified in
the Kubota Workshop
V2403−M−T−E3B that is included at the end of this sec-
tion.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
Operator's Manual
The Operator's Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your Groundsmaster machine. Refer to that
publication for additional information when servicing the
machine.

Stopping the Engine

IMPORTANT: Before stopping the engine after
mowing or full load operation, cool the turbo-char-
ger by allowing the engine to run at low idle speed
for 5 minutes. Failure to do so may lead to turbo-
charger trouble.
Kubota Diesel Engine
Manual, Diesel Engine,
Page 3 − 2
tools are described in the Kubota Workshop Manual,
Diesel Engine, V2403−M−T−E3B. The use of some spe-
cialized test equipment is explained. However, the cost
of the test equipment and the specialized nature of
some repairs may dictate that the work be done at an en-
gine repair facility.
Service and repair parts for Kubota engines are sup-
plied through your Authorized Toro Distributor. If no
parts list is available, be prepared to provide your distrib-
utor with the Toro model and serial number.
Groundsmaster 4000−D