Appendix Cinstalling The Optional Game Module (Mvgp1) - Audiovox VODEXL10 Installation Manual

APPENDIX C
This section is intended as an installation guide to connect the MVGP1 Game Module to the VODEXL10 video system.
NOTE: The MVGP1 Game Module is sold separately and is supplied with its own instruction manual.
Installing the MVGP1 Game Module
1. Turn the DVD Player over on a surface with protective covering
to prevent scratches.
2. Begin looping the excess MVGP1 Game Module harness under
the protective top plate towards the back of the DVD player as
shown.
3. Place the MVGP1 Game Module onto the mounting standoffs.
4. Locate the two #2 x 1/4 Phillips Self Tapping Screws
(P/N 100-2606) in the VODEXL10 hardware kit.
5. Using a screwdriver, install the two screws into the two locations
shown.
NOTE: Use caution tightening screws as the threads may strip in
the DVD Player.
6. Insert the 8-pin connector of the MVGP1 Game Module harness
into the location shown.
7. Verify Game Module and Game Controllers function properly
(refer to Owner's Manual).
INSTALLING THE OPTIONAL GAME MODULE (MVGP1)
MVGP1 Game Module
Harness l
oop
Top of VODEXL10 Video System
17
Back of Unit
Screw
MVGP1
Screw
8-Pin
Harness
Connector