Table of Contents
Advertisement
OPERATION INSTRUCTIONS
Input power 12V DC (AC-DC Adapter)
The functions of the Wi-Powerhouse are adjusted by the "clear" button.
Frequency selection
Auto frequency selection
Press the button <AUTO> on the panel of the wireless transmitter until the signal flashes, which
means the frequencies of the two fixtures have already matched successfully.
With memory save functions of the Wi-Powerhouse, if the matching data is not removed, the two
fixtures can match to work all the time. You do not need to rematch next time.
Cancel matching
Press the button <clear> on the panel until the signal indicator does not flash, which means the
matching data has been cancelled. So the Wi-Powerhouse can work to match with other transmitters.
Match with multiple groups
Match a group of Wi-Powerhouse and transmitters firstly when you make many groups match to work
(Disconnect the power supply of others and only keep one group), and then turn on another group,
never power on for matching at the same time. You can power off for the already matched fixtures and
you can also make them not power off.
One transmitter and multiple Wi-Powerhouses
Match the transmitter with one Wi-Powerhouse firstly and then power off the Wi-Powerhouse after
matching, match another Wi-Powerhouse with the transmitter, so one transmitter can work with
multiple Wi-Powerhouse after finishing matching.
Note:
Make sure the distance of the transmitter and Wi-Powerhouse is between 0.6 and 10 meters when
matching and they can be used far away after matching successfully.
With memory save functions, the work mode and frequency band are kept before power off.
Functions for 3-pin XLR female connectors
DMX512 signal output
1: DMX Signal coverage, 2: DMX signal -, 3: DMX signal +
- 5 -
Advertisement
Table of Contents
