Safety Instructions - Beamz PROBEAM7R User Manual

1. INTRODUCTION
Thank you for selecting this product. The Moving Beam 7R is a beam moving head
with OSRAM lamp. It produces stunning beam effects, ideal for stages, conernts, TV
studios, live shows, night clubs, etc. To optimize the performance of this product,
please read the user manual carefully before use.
1.1 Unpacking
The following items are included in the box:
■ 1 x PROBEAM7R
■ 1 x Power Cord
■ 2 x Mounting Brackets
■ 1 x User Manual
Carefully unpack the carton, check the contents to ensure that all parts are present,
and have been received in good condition. Contact your supplier immediately and
retain packing material for inspection if any part is missing or damaged.

1.2 Safety Instructions

Warning!!! To reduce the risk of fire, electric shock, or injury to persons,
!
follow these important safety instructions:
▪ The product is for indoor use only.
▪ Always turn off, unplug power and allow fixture to cool before servicing.
▪ Ensure that fixture is properly grounded.
▪ Please keep this User Guide for future consultation.
▪ Always make sure that you are connecting to the proper voltage and that the line
voltage you are connecting to is not higher than that stated on decal or rear panel of
the fixture.
▪ Always disconnect from power before servicing or replacing fuse.
▪ Make sure power cord is never crimped or damaged.
Caution! Never touch the device during operation!
The housing may heat up.
Caution! Never look directly into the light source, as
sensitive persons may suffer an epileptic shock.
Caution! The electric connection must be carried
out only by a qualified electrician.
1