Wolf OG36 Use & Care Manual page 13

Outdoor Grill Use & Care
Rotisserie System
The two-position rotisserie system allows for food of
different sizes to cook at the proper distance from the
infrared rotisserie burner.
LOW POSITION FOR LARGE LOADS
1) Install the rotisserie motor as shown. The motor socket
hole will line up with the lower notch of the spit
saddles.
2) Insert the rotisserie spit rod into the motor socket hole
and place the rod on the lower notch of each spit
saddle.
3) Remove the hex-grates.
4) Place the basting pan on top of the briquette trays to
catch the drippings.
HIGH POSITION FOR SMALL LOADS
1) Install the rotisserie motor as shown. The motor socket
hole will line up with the upper notch of the spit
saddles.
2) Insert the rotisserie spit rod into the motor socket hole
and place the rod on the upper notch of each spit
saddle. Place a basting pan on top of the hex-grates to
catch the drippings.
For easy removal of the spit rod, lift slightly on the rotis-
serie motor and pull the spit rod out.
LOW POSITION
Low rotisserie position.
HIGH POSITION
High rotisserie position.
Warming Rack
The warming rack has three positions. It may be used to
warm food in the high or low position, or stowed away
when not in use. The high position is further away from the
heat source while the low position is closer to the heat
source. When the warming rack is not in use, it conve-
niently stows away by moving up to the top support
hooks.
IMPORTANT NOTE: From the high position, the warming
rack must be removed and rotated 180° for the low
position and storage position.
The warming rack must be removed or in the storage
position during rotisserie operation.
STORAGE
HIGH
LOW
Warming rack positions.
13
wolfappliance.com