Cleaning The Spray Arm - Magic Chef MCSCD6W1 User Manual

To remove the filter assembly, grab the
Open
handle of the fine filter, rotate it counter
①
clockwise, and then pull the filter in an
②
upward direction.
1) Rotate the fine filter counter clockwise.
③
2) Lift fine filter up.
3) Lift main filter up.
NOTE: Reverse the above procedure to reinstall the filter.
SUMMARY:
A) Inspect and clean the filters after every dishwashing use.
B) By unscrewing the coarse filter you can remove the filter system. Remove any
food remnants and clean the filters under running water.
Never run the dishwasher without the filters installed. Improper
replacement of the filters may reduce overall performance of the appliance, and
subsequently damage dishware and utensils. The entire filter system should be
cleaned at least once a week. When cleaning the filters do so carefully, otherwise
filters may lose their shape, degrading the performance and overall effectiveness of
the dishwasher.

CLEANING THE SPRAY ARM

It is necessary to clean the spray arm regularly for hard water chemicals that can
clog the spray arm jets and bearings. Wash the arm in warm, soapy water using a
soft brush to clean the jets.
Dishwasher Spray Arm
Lift spray arm up and out to clean
22