Installing the drive as a third drive
Connect the drive as follows.
1
st drive
Hard disk drive (usually)
MASTER
Primary
IDE connector
The following configuration is also possible.
1
st drive
Hard disk drive (usually)
MASTER
2
nd drive
Hard disk drive, or
DVD/CD drive, etc.
SLAVE
2
nd drive
Hard disk drive, or
DVD/CD drive, etc.
MASTER
Secondary
IDE connector
3
Primary
Secondary
IDE connector
IDE connector
3
rd drive
Drive
Place the jumper in
the SLAVE position.
rd drive
Drive
Place the jumper
in the MASTER
position.
17
Need help?
Do you have a question about the BWU-100A and is the answer not in the manual?
Questions and answers