Depth Range - Manual; To Switch To Manual Depth Range; To Turn Auto Depth Range On Again; Fastrack - Lowrance X96 Installation And Operation Instructions Manual

2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a
different depth range. A black bar highlights the selected range. Range
numbers in gray cannot be selected.
3. When the new range is selected, press

Depth Range - Manual

You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.

To switch to Manual Depth Range:

1. First, turn off automatic depth range. From the Sonar Page, press
|↓ to
MENU A
UTO
2. Press ↑ to
appears.
3. Press ↓ or ↑ to select a different depth range. A horizontal black bar
highlights the selected range.
4. When the new range is selected, press

To turn Auto Depth Range on again:

1. From the Sonar Page, press
NOTE:
The sonar's
installation, water and bottom conditions, and other factors.
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The graph on the rest of the screen
continues to operate normally. FasTrack gives you a rapid update of
conditions directly under the boat. This makes it useful for ice fishing,
or when you're fishing at anchor. When the boat is not moving, fish
signals are long, drawn out lines on a normal chart display. FasTrack
converts the graph to a vertical bar graph that, with practice, makes a
useful addition to fishing at a stationary location.
|
D R
EPTH ANGE
|
D R ENT
EPTH ANGE
depth capability
EXIT
.
ENT
and the Depth Range Control Scale
EXIT
|↓ to
MENU A
depends
46
to clear the menu.
to clear the menu.
D R
UTO EPTH ANGE
on the
| | .
ENT EXIT
transducer