Section 2: Mapping Mode Operation; The Power Button; Using The Touch Screen - Lowrance IWAY 350C Operation Instructions Manual

This section addresses the unit's Mapping Mode operation. Mapping Mode
includes all navigation features, from finding the nearest restaurant to
plotting a road trip across the country. If you would prefer to start out
using the built-in music player, skip ahead to Sec. 3, Music Mode Opera-
tion.
Before you turn on the unit and find where you are, it's a good idea to
learn about the different menus, the two Page screens and how they
work together. BUT, if you just can't wait to get navigating, turn to the
one-page Map Mode Practice Run on page 11.
iWAY 350c GPS unit, front view, showing Map Mode and toolbar.

The Power Button

The Power button turns the unit on and off and activates the backlight.
To turn on the unit, press
again. The unit has three preset backlight levels to select from. Repeat-
edly pressing
off the backlight. To turn off the unit (or enter Standby mode), press and
hold the
POWER
Standby mode, see the discussion of power button functions in Sec. 4.
If you find that your iWAY has locked up or become unresponsive, you can
force a restart by holding down the

Using the Touch Screen

As we've already mentioned, you will use the touch screen for most of
the iWAY's controls. You will see on-screen toolbars like the one on the
left side of the previous image, as well as menus and textual lists that
Mapping Mode Operation
POWER
will cycle through the backlight settings and turn
POWER
key for 3 seconds. For complete details concerning
Section 2:
. To turn on the backlight, press
POWER
7
button for 10-15 seconds.
Power
button
POWER