External Passive Antenna - Lowrance iFINDER Hunt Operation Instructions Manual

With the display box highlighted and flashing, press
of options. Scroll ↓ or ↑ to select a different data option, then press
You can repeat these steps to change the display in another box. When
all your changes are finished, press
Customize Navigation Page
While on the Navigation Page press
or ↑ to select a display option. With the option highlighted, press
check it (turn on) and uncheck it (turn off.) After all options are set,
press to return to the page display.
EXIT
Customize Map Page
While on the Map Page press
select a display option. With the option highlighted, press
it (turn on) and uncheck it (turn off.) After all options are set, press
to return to the page display.
EXIT

External Passive Antenna

The iFINDER HUNTc can be used with an optional external antenna.
While we recommend the powerful external active antenna, the unit can
operate with an external passive antenna as well. To do this, you have to
let the unit know it's looking for the antenna signals in a different way.
From the Satellite Status page, press
to turn on (check) or turn off (uncheck) the command.
ENT
External Passive Antenna highlighted on Satellite Status Menu.
WARNING:
As long as the External Passive Antenna command is acti-
vated, the iFINDER will only monitor GPS signals from an
external passive antenna. If you have this command acti-
vated and are not using an external passive antenna, the
unit will not be able to accurately lock on.
to return to the page display.
EXIT
|↓ to
MENU
|↓ to
MENU C
USTOMIZE
|↓ to
MENU
83
to open a list
ENT
|
C ENT
USTOMIZE
. Press ↓ or ↑ to
|
ENT
ENT
E P A
XT ASSIVE NT
.
ENT
. Press ↓
to
ENT
to check
. Press