Diagnostic For Remote Starter; Diagnostic For Alarm; Limited Warranty - Winstart WS-07U Installation Manual

Two way lcd remote car starter with alarm
Table of Contents

Advertisement

DIAGNOSTIC FOR REMOTE STARTER:

Each time you try to remote start the vehicle and it
doesn't start, the parking lights will flash to indicate the
reason why.
1 Flash:
Brake pedal depressed
2 Flashes:
Valet mode ON
3 Flashes:
Hood opened
4 Flashes:
Shut down via transmitter
5 Flashes:
Tach unlearn
6 Flashes:
Running time expired
7 Flashes:
Cranking time expired, engine not running
8 Flashes:
Exit sequence cancelled (manual transmission only)
9 Flashes:
TACH wire disconnected
10 Flashes:
Hand brake not pulled (manual transmission only)
11 Flashes:
Door opened (manual transmission only)
12 Flashes:
Ignition is ON when start via remote

DIAGNOSTIC FOR ALARM:

The remote starter with alarm will keep in memory the
last event that triggered the alarm. This will help you find
out which defected zones has triggered the system.
First, system must be disarmed by pressing the
button. Open the hood. Depress the brake pedal and
count the number of flashes from the parking lights. To
repeat the flashes, depress and release brake pedal
again.
0 Flash:
1 Flash:
2 Flashes:
3 Flashes:
4 Flashes:
5 Flashes:

LIMITED WARRANTY

18
No false alarm
Door has been opened
Shock sensor has been triggered
Hood has been opened
Panic mode has been triggered via transmitter
Trunk input has been triggered

Advertisement

Table of Contents
loading

Table of Contents