Table of Contents
Advertisement
OPTION 7: ALARM ON /OFF
This option allows you to use the system with Alarm or remote starter only.
OPTION 8: OUTPUT # 4 (Green / Black wire)
Output # 4 can be programmed as trunk opener with 1 sec or 5 second duration, or a transponder by-pass (output release
upon accessory turn ON).
OPTION 9: SHOCK SENSOR PRE-WARNING SIGNAL
The shock sensor can be selected with or without pre-warning. With pre-warning, if the vehicle detects a first impact, the
car horn will beep 3 times then wait. If the vehicle has been hit a second time within 10 seconds, the system will trigger the
alarm.
Without pre-warning, if the vehicle detects an impact, the alarm will trigger instantly.
OPTION 10: DOOR LOCK SIGNAL TIMING
1. Lock or unlock: pulse for 0.75 second
2. Lock or unlock: pulse for 3 seconds
3. Unlock: 2 pulses, the first pulse to open the driver door, the second for all passenger doors
OPTION 11: IGNITION LOCK
This feature allows the system to lock all doors when ignition key is ON. By depressing the brake pedal, all doors will
unlock automatically when ignition key is OFF.
OPTION 12: PASSIVE LOCK
Passive lock works only when passive arming option is enable (see option #13). Passive lock allows the system to lock all
doors when armed. If this option is disabled, all the doors will lock only when system is armed by transmitter.
PROGRAMMING OPTIONS
12
Advertisement
Table of Contents
