Table of Contents
Advertisement
PROGRAMMING OPTIONS
OPTION 1: TACH FINE TUNING ( SEE EXAMPLE # 3 )
Occasionally with the AUTO TACH learning feature, you may not reach exact performance on the first try. This option
allows you to fine-tune the TACH signal manually.
OPTION 2: CRANKING ADJUSTMENT
If you expect that the vehicle needs adjusting you can force the starter to slightly under crank or over crank. This adjustment may
be necessary in some older vehicles or vehicles with diesel engines to help the engine start in extremely cold weather conditions.
OPTION 3: AUTOMATIC OR MANUAL VEHICLE - FACTORY DEFAULT SETTING ( SEE EXAMPLE # 4 )
By default, the system is delivered for use on a MANUAL transmission. To use the system with an AUTOMATIC transmission,
cut the ORANGE jumper before powering ON the module then access this option to select AUTOMATIC.
This option also allows you to reinitialize the system back to factory default. You have to perform a TACH learning,
otherwise you can not start the vehicle by remote.
OPTION 4: RUNNING TIME DURATION
This option allows you to set the remote start engine running time for 5, 15 or 30 minutes. When remote started, the engine
will run for the selected amount of time.
OPTION 5: POWER AUXILIARY OUTPUT
This option allows you to set the AUXILIARY OUTPUT as:
nd
nd
nd
1: 2
ignition (default)
2: 2
accessory
3: 2
starter
OPTION 6: GLOW PLUG WAITING TIME ( FOR DIESEL ENGINE )
Diesel engines need to warm up glow plugs before starting. Turn ignition key ON and count how many seconds it takes for
the glow plug light to turn OFF then select the closest waiting time.
11
Advertisement
Table of Contents
