Table of Contents
Advertisement
OPTION 19: AUDIBLE ARMING / DISARMING
When this option is enabled, the system will chirp each time the system arm or disarm by remote.
OPTION 20: TRANSMITTER CODE LEARNING ( SEE EXAMPLE # 2 )
This option allows you to add or learn the new transmitter into your system. You can program up to 4 different transmitters.
OPTION 21: OUTPUT # 3 (Pink wire)
This option is used to rearm factory alarm but you can program it to turn ON/OFF any accessories by remote: button [UNLOCK / 2 sec].
Use
to increase and
to decrease to select Output # 3 from 1 to 6 choices as following (default 6):
1: 500ms with Disarm
2: 500ms without Disarm
OPTION 22: OUTPUT # 5 (Orange wire)
This option is used to open slide door alarm but you can program it to turn ON/OFF any accessories by remote: button [AUX / 2 sec].
Use
to increase and
to decrease to select Output # 5 from 1 to 6 choices as following (default 1):
1: 500ms with Disarm
2: 500ms without Disarm
OPTION 23: FAST REARM AND LOCK
When this option is active, the system will lock doors immediately after you close the last door (sequence for manual vehicle only)
OPTION 24: TURBO ENGINE
Some TURBO vehicles require the engine keeps running when ignition key is OFF to slow down the idle. You can select
between 4 or 6 minutes running time.
OPTION 25: OUTPUT #6 (Blue / Red wire)
This option can be used as 2
PROGRAMMING OPTIONS
3: 5sec with Disarm
3: 5sec with Disarm
nd
IGNITION, or to give 500ms pulse or 5 sec pulse for output #6 via double click on button [AUX]
4: 5sec without Disarm
5: Latching On/Off
4: 5sec without Disarm
5: Latching On/Off
14
6: Re-Arm output
6: Neg parking light
Advertisement
Table of Contents
