To Move Overlaid Data - Lowrance GlobalMap 6500C Operation Instructions Manual

2. You'll see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press | to re-
ENT ENT
move the data. To remove another item, select the item and press
| .
ENT ENT
3. When you have finished removing all the items you want from the
screen, press to return to the page display.
EXIT
Overlay Data Shown menu with Off Course option selected (left). Press
ENT to access Remove option (right). Press ENT again to remove item.

To move overlaid data:

You may find it useful to rearrange data that is floating in your display
window.
1. From one of the Map Pages, press |↓ to | .
MENU O D ENT
VERLAY ATA
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press |→ to | .
ENT M ENT
OVE
3. The data begins to flash on your screen. Use any combination of →,
←, ↑ and ↓ to move the data to a new location on the screen.
4. When satisfied, press | .
EXIT EXIT
↓
To resize overlaid data: press | to | . This will
MENU O D ENT
VERLAY ATA
bring up the Overlay Data Shown menu with a list of the current over-
lay data. Use → ← to toggle the size of the data between small, me-
dium, large and enormous. When you are satisfied with the data size,
press . You can also change the data size by highlighting the data
EXIT
you want to change on the Overlay Data Shown menu and pressing
This will bring up the data information menu. Use ↓ to select
ENT.
overlay size, then press . Select the desired data size, then press
ENT
| | to return to the main screen.
EXIT EXIT EXIT
95