Waypoint Sharing; Backlight Synchronization - Lowrance LMS-520C Installation And Operation Instructions Manual

The second tab at the top of the NMEA 2000 Alarms page is the Alarm
Status Tab. When an alarm has been set for a device, the alarm and its
current status will be shown on the Alarm Status window. To view the
Alarm Status window, highlight the Alarm Status tab and press
To set NMEA 2000 Alarm:
1. Press
MENU
2. Highlight
NMEA 2000 A
3. Highlight
F
vice you want to set an alarm for and press
4. Highlight the
Empty Alarm) and press
5. To set the alarm percentage, press → to highlight
.
ENT
6. Use ↑ ↓, ← → to input the desired percentage and press
Steps 3-4 to set the other alarm.
7. Highlight
S
Press repeatedly to get back to the main display.
EXIT
NOTE:
To turn off (uncheck) an alarm, highlight its
.
ENTER

Waypoint Sharing

Waypoint Sharing allows you to share a waypoint from one display unit
with display units across the network.
To turn on/off Waypoint Sharing
1. Press
MENU
2. Highlight
W
point sharing.
3. Press repeatedly to get return to the main display.
EXIT

Backlight Synchronization

The Backlight Synchronization command will keep all display unit
backlight levels consistent across the NMEA 2000 network. So, if you
set the backlight level to 75% on one display unit, all other units on the
network will automatically switch to the same setting.
| , select
MENU
LARMS
L D
LUID EVEL EVICE
box next to the desired alarm (Full Alarm or
E
NABLED
ENT
C
ET ONFIGURATION
| , select
MENU
S
AYPOINT HARING
and press
NMEA 2000
and press
ENT
and press
ENT
to turn on the alarm.
and press
ENT
:
and press
NMEA 2000
and press
ENT
214
.
ENT
.
. Use ↑ ↓ to select the de-
.
ENT
P
ERCENT
to finalize alarm settings.
E
NABLED BOX
.
ENT
which will turn on/off way-
.
ENT
and press
. Repeat
ENT
and press