Radar
new Waypoint
Creates waypoint at your current position. The waypoint is
shown on the chart screen to prevent the radar screen from being
cluttered.To create a new waypoint, press the New waypoint
softkey at the bottom of the Radar page.
eBL/VRM 1 and eBL/VRM 2
Places selected Electronic Bearing Line and Variable Range
Marker on the display.
To place EBL/VRM:
1.
Press the
second EBL/VRM select the Place EBL/VRM 2
softkey.
Cursor position window
When the cursor is active on screen the Cursor position window appears in the
bottom left corner of the Radar page.
Place EBL/VRM 1 softkey. To place a
Cursor position window
70