Waypoint Sharing; To Turn On/Off Waypoint Sharing; Backlight Synchronization; Configuring Ep Sensors - Lowrance GlobalMap Baja 840C Operation Instructions Manual

4. Highlight the
Empty Alarm) and press
5. To set the alarm percentage, press → to highlight
.
ENT
6. Use ↑ ↓, ← → to input the desired percentage and press
Steps 3-4 to set the other alarm.
7. Highlight
S
Press repeatedly to get back to the main display.
EXIT
NOTE:
To turn off (uncheck) an alarm, highlight its
.
ENTER

Waypoint Sharing

Waypoint Sharing allows you to share a waypoint from one display unit
with display units across the network.

To turn on/off Waypoint Sharing

1. Press
MENU
2. Highlight
W
point sharing.
3. Press repeatedly to get return to the main display.
EXIT

Backlight Synchronization

The Backlight Synchronization command will keep all display unit
backlight levels consistent across the NMEA 2000 network. So, if you
set the backlight level to 75% on one display unit, all other units on the
network will automatically switch to the same setting.
To turn on/off Backlight Synchronization:
1. Press
MENU
2. Highlight
B
on/off Backlight Synchronization.
3. Press repeatedly to get back to the main display.
EXIT

Configuring EP Sensors

All configurable devices are configured through their Device Configura-
tion menus, which may be accessed through the network devices list on
the Bus Configuration menu.

EP-35 Temperature Configuration

To input Device Name:
1. Press
MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
box next to the desired alarm (Full Alarm or
E
NABLED
ENT
C
ET ONFIGURATION
| , select
MENU
S
AYPOINT HARING
| , select
MENU
S
ACKLIGHT YNCHRONIZATION
| , use ↑ ↓ to select
MENU
to turn on the alarm.
and press
ENT
:
and press
NMEA 2000
and press
ENT
and press
NMEA 2000
and press
NMEA 2000
126
P
ERCENT
to finalize alarm settings.
E
NABLED BOX
.
ENT
which will turn on/off way-
.
ENT
, which will turn
ENT
and press
and press
. Repeat
ENT
and press
. The
ENT