Pop-Up Help - Lowrance LMS-520C Installation And Operation Instructions Manual

Trip Distance set to small size in the Overlay Data Shown menu (left).
To change displayed data font size:
1. From the Map or Sonar page, press
2. Press ↓ ↑ to select the desired data type, then use ← → to enlarge or
reduce the size of the overlay data on the map display.
3. Press
EXIT
be displayed in the new size. (To change the font size for another Data
Type, repeat these steps, beginning with step 2 above.)
NOTE:
Some data types can be displayed in only one font size. If that is the
case, the Data Size box will not be displayed for that data type.

Pop-up Help

Help is available for virtually all menus in this unit. By leaving a menu
item or command highlighted for a few seconds, a pop-up message will
appear, giving a brief description of the functions purpose. This feature
is on by default.
To set up Popup Help:
1. Press
MENU
2. With the option highlighted, press
check it (turn off.)
3. After the option is set, press
Trip Distance set to Large size (right).
to return to the map display. The selected data type will
| |↓ to
MENU S
MENU
|
S ENT
YSTEM ETUP
ENT
| to return to the page display.
EXIT EXIT
178
|↓ to
O
VERLAY
|↓ to
P H
OPUP
to check it (turn on) and un-
| .
D ENT
ATA
.
ELP