Nmea 2000 Alarms; Waypoint Sharing - Lowrance GlobalMap 5200C GPS Operation Instructions Manual

NMEA 2000 Alarms

The NMEA 2000 Alarms menu allows you to set Full and Empty fuel
alarms for the EP-10 Fuel Flow, EP-15 Fluid Level, EP-50 Storage De-
vice and the Suzuki Engine Interface. The alarms may be set to a per-
centage (0-100%) of tank capacity.
The second tab at the top of the NMEA 2000 Alarms page is the Alarm
Status Tab. When an alarm has been set for a device, the alarm and its
current status will be shown on the Alarm Status window. To view the
Alarm Status window, highlight the Alarm Status tab and press
To set NMEA 2000 Alarm:
1. Press |
MENU
2. Highlight
NMEA 2000 A
3. Highlight
F
LUID
vice you want to set an alarm for and press
4. Highlight the
Empty Alarm) and press
5. To set the alarm percentage, press → to highlight
.
ENT
6. Use ↑ ↓, ← → to input the desired percentage and press
Steps 3-4 to set the other alarm.
7. Highlight
S
ET
Press repeatedly to get back to the main display.
EXIT
NOTE:
To turn off (uncheck) an alarm, highlight its
.
ENTER

Waypoint Sharing

Waypoint Sharing allows you to share a waypoint from one display unit
with display units across the network.
To turn on/off Waypoint Sharing
1. Press |
MENU
2. Highlight
W
AYPOINT
point sharing.
3. Press repeatedly to get return to the main display.
EXIT
Backlight Synchronization
The Backlight Synchronization command will keep all display unit
backlight levels consistent across the NMEA 2000 network. So, if you
www.Busse-Yachtshop.de
, select
MENU NMEA 2000
LARMS
L D
EVEL EVICE
box next to the desired alarm (Full Alarm or
E
NABLED
to turn on the alarm.
ENT
C
ONFIGURATION
:
, select
MENU NMEA 2000
and press
S
HARING
and press
and press .
ENT
and press . Use ↑ ↓ to select the de-
ENT
ENT
and press
ENT
and press
which will turn on/off way-
ENT
126
email: info@busse-yachtshop.de
.
ENT
.
P
ERCENT
ENT
to finalize alarm settings.
E
NABLED BOX
.
ENT
.
ENT
and press
. Repeat
and press