Sonar Ch1 - Blue 9-Pin Connector; Sonar Ch2 - Black 9-Pin Connector - Lowrance HDS Live Installation Manual

Video input configuration
Configurations to video input are made in the video panel, refer to
the Operator Manual for more information.

Sonar CH1 - blue 9-pin connector

Supports:
• Sonar / CHIRP Sonar
• DownScan
• Active Imaging 3D transducer
• LiveSight Down/Forward transducer
Ú Note:
A 7-pin transducer cable can be connected to a 9-pin
port using a 7-pin to 9-pin adaptor cable. However, if the
transducer has a paddle wheel speed sensor, the water-speed
data will not be displayed on the unit.
Ú Note:
Channel 1 can do SideScan via an Active Imaging 3D
transducer. It cannot do SideScan from an Active Imaging,
Active Imaging 3-in-1, TotalSCan, StructureScan or
StructureScan HD transducer.

Sonar CH2 - black 9-pin connector

Supports:
• Sonar / CHIRP Sonar
• DownScan
• SideScan
• Active Imaging/Active imaging 3-in-1/TotalScan/StructureScan
Ú Note:
A 7-pin transducer cable can be connected to a 9-pin
port using a 7-pin to 9-pin adaptor cable. However, if the
transducer has a paddle wheel speed sensor, the water-speed
data will not be displayed on the unit.
Wiring | HDS Live Installation Manual
27