Summary - Billion BiPAC 2071 White Paper

5. Summary

The HomePlug AV standard provides data transfer rate of up to 200Mbps. Most of the multi-media
applications are transferred through the Internet in the house. BiPAC 2071/2072 uses HomePlug AV to
establish super fast network connectivity. Additionally, it does not require the time and money needed to
install any other device, nor does it require any drilling in the house, thus it helps to avoid problems that
might have arisen from signal instability over wireless networks.
HomePlug AV enables users in the same power loop to bridge modems, routers, PCs, set-top-boxes, and
game consoles and easily setup a data network accessible through existing in-home power lines and share
bandwidth-consuming applications with family all around the house.
BiPAC 2071/2072 with power saving feature can automatically detect its Ethernet connection. If no Ethernet
device is being used, BiPAC 2072 will automatically go into Standby Mode or Power Saving Mode, which
saves power consumption by at least 60%, increasing energy efficiency and saving money on your electricity
bill.
In addition, BiPAC 2072 (HomePlug AV 200 Ethernet Bridge with AC Pass-Through) features a built-in
electrical power outlet with noise filter- AC Pass-Through. This handy add-on offers users an additional
power extension for other electrical devices where limited wall outlets exist. With noise filtering, the BiPAC
2072 enhances power-line communications coverage and supports superior and noise-immune data
transmission.
Billion's HomePlug AV 200Mbps series combine these specific features to enable users to access the
Internet applications through the power lines.
HomePlug AV 200Mbps - BiPAC 2071/BiPAC 2072
White Paper
Copyright © Billion Electric Co., Ltd.
Technical Support：support@billion.com
www.billion.com
11