Back Panel - Denon HEOS Amp Owner's Manual

Contents
o Back panel
A AC input (AC IN)
Used to connect the power cord. (v p. 16)
B Reset Button (RESET)
Various settings are reset to the factory default values.
(v p. 48)
C Digital Audio Input (OPTICAL IN)
Used to connect audio devices with a digital optical cable.
(v p. 14)
D USB Input (USB 5 V/1 A)
Used to connect USB storage devices. (v p. 15)
E Network Connector (NETWORK)
Used to connect this unit to a wired Ethernet network. (v p. 18)
F Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 13)
Setup Use
q
Troubleshooting
w e r t
5V1A
RESET
OPTICAL IN USB
IMPEDANCE : 4 16 Class 2 Wiring
SUB
LINE IN AUX IN
SPEAKERS WOOFER
y u i o
G Subwoofer Output (SUB WOOFER)
Used to connect this unit to a powered subwoofer. (v p. 14)
H Analog Line Input (LINE IN)
Used to connect audio devices with a stereo RCA cable.
(v p. 14)
I AUX Input (AUX IN)
Used to connect audio devices with a 3.5 mm cable. (v p. 14)
Used to add the speaker to your wireless network. (v p. 18)
J Connect Button (CONNECT)
Used for Wi-Fi setup.
K Connect in Status LED
Indicates the status of this unit. (v p. 50)
11
Status LED
NETWORK
CONNECT
Q0 Q1
Appendix