The Front Led Of Heos 1 Flashes Repeatedly - Denon HEOS 1 Owner's Manual

Contents

The front LED of HEOS 1 flashes repeatedly

When the battery level is near zero the front LED of the HEOS 1 may flash repeatedly. This indicates that there is insufficient
0
power in the battery to boot up the speaker. Please connect the AC adapter to the speaker which will charge the battery. The
speaker can be used as normal while it is being charged.
Cannot pair a Bluetooth mobile device with the speaker
The connection from the mobile Bluetooth device is malfunctioning. Power cycle the mobile device, remove the pairing
0
information and re-pair the HEOS 1 speaker to the mobile device.
Press and hold the connect button for 3 seconds and release the button when you see a pattern of two flashes on the status
0
LED. Make sure your mobile device has Bluetooth turned on and select "HEOS 1" from the list of Bluetooth devices.
Setup Use
Solution
Solution
Troubleshooting
48
Status LED Appendix
Refer to Page
Refer to Page
44
–
45