Denon HOME 250 Owner's Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Speakers
  5. HOME 250
  6. Owner's manual

Denon HOME 250 Owner's Manual

Hide thumbs Also See for HOME 250:
Table of Contents

Advertisement

Quick Links

Contents
Setup
Use
Troubleshooting
Status LED
Appendix
DENON HOME 250
WIRELESS SPEAKER
Owner's Manual
1

Advertisement

Table of Contents
loading

Related Manuals for Denon HOME 250

Summary of Contents for Denon HOME 250

  • Page 1 Contents Setup Troubleshooting Status LED Appendix DENON HOME 250 WIRELESS SPEAKER Owner’s Manual...
  • Page 2 Contents Contents Setup Troubleshooting Status LED Appendix Introduction Using your speaker Before your begin Selecting a room/speaker System requirements Quick Select function Network requirements Listening to radio Getting to know your speaker Playing music stored on your mobile device Front panel Playing music from your networked PC or NAS Top panel Playing music from the AUX input...
  • Page 3 Contents Setup Troubleshooting Status LED Appendix Listening to the same music in multiple rooms AirPlay function Grouping rooms Playing songs from your iPhone, iPod touch or iPad Ungrouping rooms Playing iTunes music with your speaker Play a song from your iPhone, iPod touch or iPad on multiple Grouping all rooms (party mode) synced devices (AirPlay 2) Ungrouping all rooms...
  • Page 4 Contents Setup Troubleshooting Status LED Appendix Updating your system Status LED table Advanced features Supported file types and codecs Sharing music from your mobile device Specifications Wireless performance Information Submit diagnostics Trademarks Resetting your controller app License Power management License information for the software used in the unit Power modes Quick Start Mode Deep Standby...
  • Page 5 Setup Troubleshooting Status LED Appendix Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. NOTE 0 This document contains information that is subject to change without notice. Introduction The speaker is part of the HEOS system that enables you to enjoy your favorite music anywhere and everywhere around your home.

  • Page 6: Before Your Begin

    Ethernet network, a Wi-Fi connection to the router is required to control the system using the HEOS app. If you do not have a wireless network, please contact your local Denon dealer or electronics retailer to assist you with purchasing and installing a wireless network in your home.

  • Page 7: Getting To Know Your Speaker

    Contents Setup Troubleshooting Status LED Appendix Getting to know your speaker Unpack your speaker from the box and verify that the following items are included: Speaker Quick Start Guide Safety Instructions Notes on Radio Mounting screw Warranty Power cord Power cord (North America model only) (for Europe model) (for North America model)

  • Page 8: Front Panel

    Contents Setup Troubleshooting Status LED Appendix o Front panel A Speakers B Status LED Please refer to the “Status LED table” for LED color and state meaning. (v p. 56)

  • Page 9: Top Panel

    Contents Setup Troubleshooting Status LED Appendix o Top panel A Quick select buttons (1 - 3) Register input source settings to these buttons or recall those Hold your hand over the top of the speaker to show the operation settings. (v p. 18) panel buttons.

  • Page 10: Rear Panel

    Contents Setup Troubleshooting Status LED Appendix o Rear panel A AC inlet Used to connect the power cord. (v p. 13) B Bluetooth button (V) Used in the Bluetooth pairing settings. (v p. 23) C AUX input connector (AUX IN) Used to connect audio devices.

  • Page 11: Bottom Panel

    Contents Setup Troubleshooting Status LED Appendix o Bottom panel A Mounting screw hole Used when mounting this unit to the wall or ceiling. (v p. 12)

  • Page 12: Placing Your Speaker

    Do not attach it directly to the wall or ceiling. If attaching this unit to the wall or ceiling, check that it is attached securely. Please be aware that Denon accepts no responsibility for any Φ3/8 inches / 8 mm or less...

  • Page 13: Powering Your Speaker

    Contents Setup Troubleshooting Status LED Appendix Powering your speaker Connect the power cord included in the box to the rear panel of the speaker and the plug to a wall outlet. The speaker is capable of automatically switching between 100 - 240 V. To household power outlet AC 100 - 240 V, 50/60 Hz (for Europe model)

  • Page 14: Getting The Heos App

    Contents Setup Troubleshooting Status LED Appendix Getting the HEOS app The HEOS app is the heart of the HEOS system experience. Using your mobile device and the HEOS app, you can setup, browse, explore, and control your HEOS system right in the palm of your hand, from anywhere in your home. Download the HEOS app for iOS or Android by searching App Store , Google Play™...
  • Page 15 Contents Setup Setup Troubleshooting Status LED Appendix Setting up your first speaker Once you have placed your speaker in your listening room and have downloaded the HEOS app, you are ready to configure your speaker for music playback. This involves following a few simple steps to get the speaker connected to your existing home network: Caution Do not connect the Ethernet cable if you are connecting your speaker to a wireless network.
  • Page 16 Contents Setup Troubleshooting Status LED Appendix Adding more speakers The HEOS system is a true multiroom audio system that automatically synchronizes audio playback between multiple speakers so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 speakers to your HEOS system. Adding wired speakers Just connect the speaker to your home network using an Ethernet cable and the speaker will appear on your HEOS app as a new room in the “Rooms”...

  • Page 17: Using Your Speaker

    Tap the “Rooms” tab. Kitchen Song Name 2 Select the Room/Speaker you want to control. Denon Home 250 Song Name 3 Select the “Music” tab to select a music source or the “Now Playing” tab to control what is currently playing in the selected room.

  • Page 18: Quick Select Function

    Contents Setup Troubleshooting Status LED Appendix Quick Select function Input source settings can be registered to the Quick select buttons (1 - 3). To register the current settings, press and hold down one of the Quick Select buttons (1 - 3) on the top panel for 3 seconds.

  • Page 19: Listening To Radio

    Contents Setup Troubleshooting Status LED Appendix Listening to radio Playing music stored on your mobile device The HEOS system includes access to more than 100,000 free internet radio streams from all corners of the globe via the TuneIn radio service. Just select the TuneIn logo from the main “Music”...
  • Page 20 Contents Setup Troubleshooting Status LED Appendix Playing music from your networked PC Audio signal or NAS (Network Attached PC Storage) Select “Music Servers” from the “Music” tab. Select the name of your networked PC or NAS (Network Attached Storage) server. Browse the music on your PC/NAS and select something to play.

  • Page 21: Playing Music From The Aux Input

    Contents Setup Troubleshooting Status LED Appendix Playing music from the AUX input Connect an audio device with a 3.5 mm stereo audio Audio signal output to the AUX input on your speaker using a 3.5 mm stereo audio cable sold separately. When a 3.5 mm stereo audio cable is connected to “AUX IN”, the source automatically switches to Inputs.
  • Page 22 Contents Setup Troubleshooting Status LED Appendix Playing music from a USB memory Audio signal device Insert a FAT32 or NTFS formatted USB memory device into the USB port on the rear panel of the speaker. Select “USB Music” from the “Music” tab. Select the name of your speaker.

  • Page 23: Playing Music From Bluetooth Device

    LED. NOTE 0 Disconnect and reconnect Bluetooth connections from your Bluetooth device. Select “Denon Home 250” from the list of available Bluetooth devices. In a few seconds your mobile device will indicate that it is connected to your speaker.

  • Page 24: What Is A Heos Account

    Contents Setup Troubleshooting Status LED Appendix o Changing your HEOS account HEOS account Tap the “Music” tab. o What is a HEOS account? Select the Settings a icon in the upper left corner of A HEOS account is master account or “keychain” for managing all of your music services with one single username and password.

  • Page 25: Playing From Streaming Music Services

    Contents Setup Troubleshooting Status LED Appendix o Changing music service settings Playing from streaming music services Tap the “Music” tab. A music service is an online music company that provides access to vast music collections via free and/or paid subscriptions. Depending upon your geographical location, there are several options to choose from.

  • Page 26: Managing Inputs

    Contents Setup Troubleshooting Status LED Appendix o Changing the name of the inputs Managing inputs Select the name of the input you want to edit. If you connected external audio source components to any of your speakers inputs, you can rename the default input names to describe the Select “Name”.

  • Page 27: Managing Your Phone

    Contents Setup Troubleshooting Status LED Appendix Managing your phone Your smartphone or tablet can be hidden if it does not need to be in the “Music Sources” menu. Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu.

  • Page 28: Listening To The Same Music In Multiple Rooms

    Contents Setup Troubleshooting Status LED Appendix Listening to the same music in multiple Rooms Rooms rooms Drag one room into another to group them Drag one room into another to group them Dining Dining The HEOS system is a true multiroom audio system that automatically Song Name 1 Song Name 1 synchronizes audio playback between multiple speakers so that the audio...

  • Page 29: Ungrouping Rooms

    Contents Setup Troubleshooting Status LED Appendix o Ungrouping rooms Rooms Rooms Press and hold your finger on room that you want to Drag one room into another to group them Drag one room into another to group them remove from the group. Dining Dining Song Name 1...

  • Page 30: Grouping All Rooms (Party Mode)

    Contents Setup Troubleshooting Status LED Appendix o Grouping all rooms (party mode) Rooms Rooms You can easily group 16 rooms together into Party Mode by using a Drag one room into another to group them Drag one room into another to group them “pinch”...

  • Page 31: Ungrouping All Rooms

    Contents Setup Troubleshooting Status LED Appendix o Ungrouping all rooms Rooms Rooms You can easily ungroup all of your rooms and exit Party Mode by using Drag one room into another to group them Drag one room into another to group them a “spread”...

  • Page 32: Stereo Pairing

    Contents Setup Troubleshooting Status LED Appendix Stereo pairing o Creating a stereo pair Rooms Edit Rooms Drag one room into another to group them Drag one room into another to group them A matching pair of speakers that have been grouped together (see above) Dining Dining can be saved as a persistent stereo pair where one speaker outputs the...
  • Page 33 Contents Setup Troubleshooting Status LED Appendix Tap on the Stereo Pair switch to pair the two speakers. Edit Group Rooms Drag one room into another to group them Tap the Back arrow B to return to the list of Rooms. Name Living L + Living R Dining...

  • Page 34: Changing The Name Of A Stereo Pair

    Contents Setup Troubleshooting Status LED Appendix o Changing the name of a stereo pair o Adjusting the balance Tap the “Rooms” tab. Tap the “Rooms” tab. Tap the Pencil e icon to enter Edit mode. Tap the Pencil e icon to enter Edit mode. Tap a Stereo Pair (a room which contains two matching Tap a Stereo Pair (a room which contains two matching speakers) to edit the group.

  • Page 35: Swapping Left And Right Channels In A Stereo Pair

    Contents Setup Troubleshooting Status LED Appendix o Swapping left and right channels in a stereo o Removing a stereo pair pair Tap the “Rooms” tab. Tap the “Rooms” tab. Tap the Pencil e icon to enter Edit mode. Tap the Pencil e icon to enter Edit mode. Tap a Stereo Pair (a room which contains two matching Tap a Stereo Pair (a room which contains two matching speakers) to edit the group.

  • Page 36: Using The Now Playing Queue

    Contents Setup Troubleshooting Status LED Appendix Using the now playing queue HEOS system uses a Now Playing “Queue” to line up music that you want to listen to. Music can be selected from any of your local or online music sources (as long as they are not preprogrammed “radio”...

  • Page 37: Rearranging The Now Playing Queue

    Contents Setup Troubleshooting Status LED Appendix Rearranging the now playing queue Deleting songs from the play queue Once you have songs lined up in your queue, you might want to rearrange You can remove songs one at a time from the Now Playing Queue: the order or remove some songs: Tap the “Now Playing”...

  • Page 38: Deleting All Songs From The Play Queue

    Contents Setup Troubleshooting Status LED Appendix Deleting all songs from the play queue Saving playlists You can remove all of the songs from the Now Playing Queue: You can save the Now Playing Queue as a HEOS Playlist that you can recall later.

  • Page 39: Using The Favorite

    Contents Setup Troubleshooting Status LED Appendix o Deleting station from the HEOS favorite Using the favorite Tap the “Music” tab. HEOS system uses a "HEOS Favorites" to line up station you want to start play quickly the favorite stations. Select “Favorites”. Station can be selected from online music sources such as "Radio"...

  • Page 40: Airplay Function

    Contents Setup Troubleshooting Status LED Appendix AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be Audio signal played on this unit via the network. NOTE 0 The screen may differ depending on the OS and software versions. This device supports AirPlay 2 ®...

  • Page 41: Playing Songs From Your Iphone, Ipod Touch Or Ipad

    Contents Setup Troubleshooting Status LED Appendix Playing songs from your iPhone, iPod Playing iTunes music with your touch or iPad speaker If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can Install iTunes 10, or later, on a Mac or Windows PC that stream music stored in your “iPhone/iPod touch/iPad”...
  • Page 42 Songs from an iPhone, iPod touch or iPad operating iOS 11.4 or later can be synced with multiple AirPlay 2 supported devices for simultaneous iPhone playback. Denon xxxxxxxx Speakers Play the song on your iPhone, iPod touch or iPad. AirPlay icon is displayed on the iPhone, iPod touch or iPad screen.

  • Page 43: Making Speaker Adjustments

    Contents Setup Troubleshooting Status LED Appendix Making speaker adjustments You can adjust specific settings for each of your speakers in your system: Changing the wireless network connection Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu.

  • Page 44: Changing The Speaker's Equalizer

    Contents Setup Troubleshooting Status LED Appendix Changing the speaker’s equalizer Adjusting the audio quality Selects the transcoding option for rebroadcasting audio from one speaker Select “EQ”. to another speaker (or group of devices) across the network. When set to high bit rate audio sources originating from the first device Adjust the “Treble”...

  • Page 45: Advanced Speaker Settings

    Contents Setup Troubleshooting Status LED Appendix o About wireless power saving Advanced speaker settings The Wireless Power Savings feature saves power by turning off power to the wireless radio inside the speaker when the device is connected Caution to an Ethernet network. If you disconnect the Ethernet cable from the Adjusting these settings may disconnect your speaker from your speaker, Wireless Power Saving will automatically turn off and the network and possibly render your speaker unusable.

  • Page 46: Firmware Upgrade

    Contents Setup Troubleshooting Status LED Appendix o Firmware upgrade o About Viewing technical details about the speaker. Select “Advanced”. Select “Advanced”. Select “FIRMWARE UPDATE” tab. Select “ABOUT” tab. Update status Scroll down to see information about the speaker’s. Manually check for a firmware upgrade. a.

  • Page 47: Updating Your System

    Contents Setup Troubleshooting Status LED Appendix Updating your system HEOS system has the ability to add enhancements and updated functionality via your high speed Internet connection. Follow the instructions on the screen to update the speaker and/or your controller app. Select “Software Update”.

  • Page 48: Advanced Features

    Contents Setup Troubleshooting Status LED Appendix Advanced features There are a few advanced features of the HEOS system that you may want to explore once you become familiar with the basic operations. You can access the advanced features of the HEOS system by following these steps: Wireless performance Select the Settings a icon located in the upper left corner of the main “Music”...

  • Page 49: Submit Diagnostics

    If you are having trouble with your network or HEOS system, you may be This feature will reset the control app to its original state when you first asked by Denon technical support personnel to select this option. This installed it on your mobile device without requiring you to remove, feature will automatically send Denon technical support diagnostic download, and reinstall it from the app store.

  • Page 50: Power Management

    Contents Setup Troubleshooting Status LED Appendix Power management Power modes o Quick Start Mode o Deep Standby This speaker automatically enters "Quick Start Mode" to save power in The device also has the ability to automatically enter “Deep Standby” the following cases. During “Quick Start Mode”, speaker operations whenever the wired or wireless network connection is removed for cause the power to turn on.

  • Page 51: Troubleshooting

    Contents Setup Troubleshooting Troubleshooting Status LED Appendix Basic troubleshooting Cannot connect the speaker to the network Solution Refer to Page Make sure your mobile device is connected to your wireless network before setting up your speaker. Alternatively, you can connect your speaker to your network router using an Ethernet cable sold separately. Once connected via Ethernet, the HEOS app should recognize the speaker and you can manually move it to your wireless network using “Settings”...

  • Page 52: Cannot Hear Bluetooth Music

    Contents Setup Troubleshooting Status LED Appendix Cannot hear Bluetooth music Solution Refer to Page Your Bluetooth mobile device is not paired with speaker. Re-pair the speaker to the mobile device. － The speaker is Wi-Fi mode or Aux-in mode etc. Pair and connect Bluetooth device to speaker. －...
  • Page 53 2. Go to the Wi-Fi menu under Settings on your iOS device. 3. Select “Denon Home 250” under “SET UP NEW AIRPLAY SPEAKER...” at the bottom of the list. 4. Select the network you want your speaker to connect to and select “Next”.

  • Page 54: I Hear Distortion When Using The Aux Input

    Contents Setup Troubleshooting Status LED Appendix I hear distortion when using the AUX input Solution Refer to Page The analog output signals from some sources can be fairly strong. If the input level of the source device is turned up high, it －...

  • Page 55: Resetting Your Speaker

    Contents Setup Troubleshooting Status LED Appendix Resetting your speaker Solution Refer to Page Resetting your speaker will clear out the wireless network info, EQ, and name but retain it’s current software. You will have to use – “Settings” - “Add Device” to reconnect the speaker to your home network before it can be used. To reset your speaker, press and hold the CONNECT and Bluetooth (V) buttons located on the rear panel of the speaker for 5 seconds until the front LED begins to flash amber.

  • Page 56: Status Led Table

    Contents Setup Troubleshooting Status LED Status LED Appendix Status LED table The LEDs on the front panel change to indicate the current speaker status. Speaker status LED action Description Deep Standby mode Power is off, or the speaker is in Deep Standby mode. (v p. 50) (off) Quick Start mode Speaker is in Quick Start mode.
  • Page 57 Contents Setup Troubleshooting Status LED Appendix Speaker status LED action Description Speaker is connecting to the network via WPS. (fast blink) Speaker is connected to the network via WPS. (for 3 sec. solid) WPS has timed out. (for 3 sec. solid)
  • Page 58 Contents Setup Troubleshooting Status LED Appendix Speaker status LED action Description Speaker is pairing via Bluetooth. (two blinks) Bluetooth Speaker is paired via Bluetooth. (one blink) Speaker failed to pair to the Bluetooth device. Try to pair again. (v p. 23) (for 3 sec.
  • Page 59 Contents Setup Troubleshooting Status LED Appendix Speaker status LED action Description Firmware is being updated. (blink) Firmware update There is a firmware error. Check your usage environment, relaunch the app, then try to update the firmware again. (v p. 46) (slow blink (Not fade)) There was a setup error.

  • Page 60: Supported File Types And Codecs

    Contents Setup Troubleshooting Status LED Appendix Appendix Supported file types and codecs Frequency Sample Rate File Extension Codec Bit Rates 32/44.1/48 88.2/96/176.4 16/24 bit 192 kHz 32 kHz MPEG-1 Audio Layer 3 44.1 kHz 16 bit 32 - 320 kbps CBR/VBR 48 kHz 32 kHz...

  • Page 61: Specifications

    Contents Setup Troubleshooting Status LED Appendix Specifications Wireless LAN Network type: Conforming to IEEE 802.11a/b/g/n/ac Used frequency range: 2.4 GHz, 5 GHz General Operating temperature: 41 °F - 95 °F (5 °C - 35 °C) Power supply: AC 100 – 240 V, 50/60 Hz (for Europe model) AC 100 –...
  • Page 62 Contents Setup Troubleshooting Status LED Appendix Dimensions Unit : in. (mm) 4 3/4 (120) 11 5/8 (295) Weight : 8 lbs 3 oz (3.7 kg) For the purpose of improvement, the specifications and design are subject to change without notice.
  • Page 63 Contents Setup Troubleshooting Status LED Appendix Information Trademarks Wi-Fi Protected Setup™ logo is trademark of Wi-Fi Alliance. Google Play and the Google Play logo are trademarks of Google LLC. The Bluetooth ® word mark and logos are registered trademarks owned Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., by the Bluetooth SIG, Inc.
  • Page 64 Contents Setup Troubleshooting Status LED Appendix Apple, AirPlay, iPad, iPad Air, iPad Pro and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used in Japan with a license from Aiphone K.K. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance...
  • Page 65 GPL/LGPL software that is used in the product. ntfs-3g_ntfsprogs 2017.3.23 Denon provides the source code based on the GPL and LPGL licenses at the actual cost upon your request to our customer service u-boot 2018.07 center.
  • Page 66 Contents Setup Troubleshooting Status LED Appendix n Mbed TLS-2.7.5 "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a Apache License copyright notice that is included in or attached to the work (an Version 2.0, January 2004 example is provided in the Appendix below).
  • Page 67 Contents Setup Troubleshooting Status LED Appendix 2. Grant of Copyright License. Subject to the terms and conditions of (c) You must retain, in the Source form of any Derivative Works that this License, each Contributor hereby grants to You a perpetual, You distribute, all copyright, patent, trademark, and attribution worldwide, non-exclusive, no-charge, royalty-free, irrevocable notices from the Source form of the Work, excluding those notices...
  • Page 68 Contents Setup Troubleshooting Status LED Appendix 6. Trademarks. This License does not grant permission to use the 9. Accepting Warranty or Additional Liability. While redistributing the trade names, trademarks, service marks, or product names of the Work or Derivative Works thereof, You may choose to offer, and Licensor, except as required for reasonable and customary use in charge a fee for, acceptance of support, warranty, indemnity, or describing the origin of the Work and reproducing the content of the...
  • Page 69 Contents Setup Troubleshooting Status LED Appendix n mDNSResponder-765.50.9 n OpenAvnu-2018-07-30 The majority of the source code in the mDNSResponder project is Copyright (c) 2012, Intel Corporation licensed under the terms of the Apache License, Version 2.0, available All rights reserved. from: Redistribution and use in source and binary forms, with or without <http://www.apache.org/licenses/LICENSE-2.0>...
  • Page 70 Contents Setup Troubleshooting Status LED Appendix n fmt-5.1.0 n libtar-1.2.20 Copyright (c) 1998-2003 University of Illinois Board of Trustees Copyright (c) 2012 - 2016, Victor Zverovich Copyright (c) 1998-2003 Mark D. Roth All rights reserved. All rights reserved. Redistribution and use in source and binary forms, with or without Developed by: Campus Information Technologies and Educational modification, are permitted provided that the following conditions are Services, University of Illinois at Urbana-Champaign...
  • Page 71 Contents Setup Troubleshooting Status LED Appendix n ARM Trusted Firmware-1.21 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED Copyright (c) 2013-2015, ARM Limited and Contributors. All rights TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A reserved.
  • Page 72 Contents Setup Troubleshooting Status LED Appendix n googletest-v1.8.0 n hostapd-2.6 Protocol Buffers-v3.6.0 wpa_supplicant-2.6 Copyright 2008, Google Inc. Copyright (c) 2002-2016, Jouni Malinen <j@w1.fi> and contributors All rights reserved. All Rights Reserved. Redistribution and use in source and binary forms, with or without These programs are licensed under the BSD license (the one with modification, are permitted provided that the following conditions are advertisement clause removed).
  • Page 73 Contents Setup Troubleshooting Status LED Appendix n libpcap-1.8.1 3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote License: BSD products derived from this software without specific prior written Redistribution and use in source and binary forms, with or without permission.
  • Page 74 Contents Setup Troubleshooting Status LED Appendix n PCRE-8.41 Written by: Zoltan Herczeg PCRE LICENCE Email local part: hzmester Emain domain: freemail.hu ------------ PCRE is a library of functions to support regular expressions whose Copyright(c) 2010-2017 Zoltan Herczeg syntax and semantics are as close as possible to those of the Perl 5 All rights reserved.
  • Page 75 Contents Setup Troubleshooting Status LED Appendix n Boost-1.66.0 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are Boost Software License - Version 1.0 - August 17th, 2003 met: Permission is hereby granted, free of charge, to any person or Redistributions of source code must retain the above copyright organization obtaining a copy of the software and accompanying notice, this list of conditions and the following disclaimer.
  • Page 76 Contents Setup Troubleshooting Status LED Appendix n libcurl-7.61.1 n libjpeg-turbo-1.5.2 Copyright (c) 1996 - 2018, Daniel Stenberg, <daniel@haxx.se>, and libjpeg-turbo is covered by three compatible BSD-style open source many contributors, see the THANKS file. licenses: All rights reserved. - The IJG (Independent JPEG Group) License, which is listed in [README.ijg](README.ijg) Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above...
  • Page 77 Contents Setup Troubleshooting Status LED Appendix 3. You cannot use the name of the IJG or The libjpeg-turbo Project or 2. You must add your own copyright notice to the header of each the contributors thereof in advertising, publicity, etc. source file you modified, so others can tell that you modified that file (if there is not an existing copyright header in that file, then **Origin**...
  • Page 78 Contents Setup Troubleshooting Status LED Appendix THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS Copyright (C) ¥<YEAR¥>, ¥<AUTHOR¥>. AND CONTRIBUTORS "AS IS", AND ANY EXPRESS OR IMPLIED This software is provided 'as-is', without any express or implied WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED warranty.
  • Page 79 Contents Setup Troubleshooting Status LED Appendix n iw-4.9 n taglib-1.11.1 Copyright (c) 2007, 2008 Johannes Berg MOZILLA PUBLIC LICENSE Copyright (c) 2007 Andy Lutomirski Version 1.1 Copyright (c) 2007 Mike Kershaw --------------- Copyright (c) 2008-2009 Luis R. Rodriguez 1. Definitions. Permission to use, copy, modify, and/or distribute this software for any 1.0.1.
  • Page 80 Contents Setup Troubleshooting Status LED Appendix 1.8.1. "Licensable" means having the right to grant, to the maximum 1.12. "You" (or "Your") means an individual or a legal entity extent possible, whether at the time of the initial grant or exercising rights under, and complying with all of the terms of, this subsequently acquired, any and all of the rights conveyed herein.
  • Page 81 Contents Setup Troubleshooting Status LED Appendix (d) Notwithstanding Section 2.1(b) above, no patent license is (d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for code that You delete from the Original Code; 2) granted: 1) for any code that Contributor has deleted from the separate from the Original Code;...
  • Page 82 Contents Setup Troubleshooting Status LED Appendix 3.2. Availability of Source Code. 3.4. Intellectual Property Matters Any Modification which You create or to which You contribute must (a) Third Party Claims. be made available in Source Code form under the terms of this If Contributor has knowledge that a license under a third party's License either on the same media as an Executable version or via intellectual property rights is required to exercise the rights...
  • Page 83 Contents Setup Troubleshooting Status LED Appendix 3.5. Required Notices. 3.6. Distribution of Executable Versions. You must duplicate the notice in Exhibit A in each file of the Source You may distribute Covered Code in Executable form only if the Code. If it is not possible to put such notice in a particular Source requirements of Section 3.1-3.5 have been met for that Covered Code file due to its structure, then You must include such notice in a Code, and if You include a notice stating that the Source Code...
  • Page 84 Contents Setup Troubleshooting Status LED Appendix 4. Inability to Comply Due to Statute or Regulation. 6.3. Derivative Works. If You create or use a modified version of this License (which you If it is impossible for You to comply with any of the terms of this may only do in order to apply it to code which is not already License with respect to some or all of the Covered Code due to Covered Code governed by this License), You must (a) rename...
  • Page 85 Contents Setup Troubleshooting Status LED Appendix 8. TERMINATION. (b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly infringes any patent, then 8.1. This License and the rights granted hereunder will terminate any rights granted to You by such Participant under Sections 2.1(b) automatically if You fail to comply with terms herein and fail to cure and 2.2(b) are revoked effective as of the date You first made, such breach within 30 days of becoming aware of the breach.
  • Page 86 Contents Setup Troubleshooting Status LED Appendix 9. LIMITATION OF LIABILITY. 11. MISCELLANEOUS. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL This License represents the complete agreement concerning THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), subject matter hereof. If any provision of this License is held to be CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL unenforceable, such provision shall be reformed only to the extent DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY...
  • Page 87 Contents Setup Troubleshooting Status LED Appendix n Jansson-2.1 EXHIBIT A -Mozilla Public License. Copyright (c) 2009-2016 Petri Lehtinen <petri@digip.org> “The contents of this file are subject to the Mozilla Public License Version 1.1 (the “License”); you may not use this file except in Permission is hereby granted, free of charge, to any person obtaining a compliance with the License.
  • Page 88 Contents Setup Troubleshooting Status LED Appendix n libffi-3.2.1 n libunwind-1.2.1 libffi - Copyright (c) 1996-2014 Anthony Green, Red Hat, Inc and Copyright (c) 2002 Hewlett-Packard Co. others. Permission is hereby granted, free of charge, to any person obtaining a See source files for details. copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without Permission is hereby granted, free of charge, to any person obtaining a...
  • Page 89 Contents Setup Troubleshooting Status LED Appendix n Dropbear-2018.76 sshpty.c is taken from OpenSSH 3.5p1, Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland The majority of code is written by Matt Johnston, under the license below. All rights reserved Portions of the client-mode work are (c) 2004 Mihnea Stoenescu, "As far as I am concerned, the code I have written for this software can under the same license: be used freely for any purpose.
  • Page 90 Contents Setup Troubleshooting Status LED Appendix * Neither the name of Google Inc. nor the names of its contributors Permission is hereby granted, free of charge, to any person obtaining a may be used to endorse or promote products derived from this copy of this software and associated documentation files (the software without specific prior written permission.
  • Page 91 Contents Setup Troubleshooting Status LED Appendix n OpenSSL-1.0.2p 6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the The OpenSSL toolkit stays under a double license, i.e. both the OpenSSL Project for use in the OpenSSL Toolkit (http:// conditions of the OpenSSL License and the original SSLeay license www.openssl.org/)”...
  • Page 92 Contents Setup Troubleshooting Status LED Appendix This library is free for commercial and non-commercial use as long as THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY the following conditions are aheared to. The following conditions apply EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT to all code found in this distribution, be it the RC4, RSA, lhash, DES, LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY etc., code;...
  • Page 93 Contents Setup Troubleshooting Status LED Appendix n SQLite-3.21.0 n zlib-1.2.11 SQLite Is Public Domain Copyright notice: SQLite is in the Public Domain (C) 1995-2017 Jean-loup Gailly and Mark Adler All of the code and documentation in SQLite has been dedicated to the This software is provided 'as-is', without any express or implied public domain by the authors.
  • Page 94 Contents Setup Troubleshooting Status LED Appendix n e2fsprogs-libs-1.45.4/lib/uuid n Expat-2.2.5 Redistribution and use in source and binary forms, with or without Copyright (c) 1998-2000 Thai Open Source Software Center Ltd and modification, are permitted provided that the following conditions are Clark Cooper met: Copyright (c) 2001-2017 Expat maintainers...
  • Page 95 Contents Setup Troubleshooting Status LED Appendix n getopt-1.29 n jQuery-1.6.1 Copyright (c) 1987, 1993, 1994 Copyright 2014 jQuery Foundation and other contributors The Regents of the University of California. All rights reserved. http://jquery.com/ Redistribution and use in source and binary forms, with or without Permission is hereby granted, free of charge, to any person obtaining a modification, are permitted provided that the following conditions are copy of this software and associated documentation files (the...
  • Page 96 Contents Setup Troubleshooting Status LED Appendix n LK embedded kernel n mongoose-2.5 Copyright (c) 2008-2015 Travis Geiselbrecht Copyright (c) 2004-2009 Sergey Lyubka Permission is hereby granted, free of charge, to any person obtaining a Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including...
  • Page 97 Contents Setup Troubleshooting Status LED Appendix n portmap-6.0 n strlcpy-1.5 Copyright (c) 1990 The Regents of the University of California. Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com> All rights reserved. All rights reserved. Redistribution and use in source and binary forms, with or without Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are modification, are permitted provided that the following conditions are...
  • Page 98 Contents Setup Troubleshooting Status LED Appendix n tinyxml-1.0.6 n The Spotify software is subject to third party licenses found here: Original code (2.0 and earlier )copyright (c) 2000-2002 Lee Thomason www.spotify.com/connect/third-party-licenses (www.grinninglizard.com) This software is provided 'as-is', without any express or implied warranty.
  • Page 99 3520 10707 00AD www.denon.com Copyright © 2019 D&M Holdings Inc. All Rights Reserved.
  • Page 100 DENON HOME 250 WIRELESS SPEAKER QUICK START GUIDE...

  • Page 101: Before You Begin

    BEFORE YOU BEGIN Make sure you have the following items in working order: Wi-Fi router Internet connection Apple iOS, Android or Kindle mobile device connected to your network...
  • Page 102 STEP 1: UNPACK Remove the speaker and power cord from the box. DENON HOME 250 Quick Start Guide...
  • Page 103 STEP 2: PLACE Place the speaker at a convenient location in your home. Speaker Speaker Router Internet Speaker...
  • Page 104 If you are connecting the speaker to a wired network, connect an Ethernet cable (sold separately) between the speaker and your router. Do not connect the Ethernet cable if you are connecting your speaker to a wireless network. DENON HOME 250 Quick Start Guide...
  • Page 105 STEP 4: CONTROL Download the HEOS App. Launch the HEOS App and follow the instructions in the Go to the Apple App Store, Google Play or Amazon App Store and search app. for “HEOS” to download and install.

  • Page 106: Step 5: Add Speaker

    STEP 5: ADD SPEAKER Settings Music Add Device ENJOY! OWNER’S MANUAL • For more information, visit www.denon.com • Refer to the Online Manual for other functions information and operation procedure details. manuals.denon.com/DenonHome250/NA/EN DENON HOME 250 Quick Start Guide...

  • Page 107: Basic Troubleshooting

    ) located on the back of the speaker for about 3 seconds, until the status light • on the front flashes green. Select “Denon Home 250” from the list of available Bluetooth speakers from your mobile device. • Play music using any app on your device and the sound will now play from the speaker.
  • Page 108 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. All other trademarks are the property of their respective owners. DENON HOME 250 Quick Start Guide...

  • Page 109: Contact Denon

    CONTACT Denon For US & Canada only: If you need further assistance with your Denon Product, please contact Denon Customer Support Services below: Website www.denon.com Telephone Toll Free (855) 499 2820 (M-F 10:00AM to 10:00PM EST / Sat 12:00PM to 8:00PM EST)
  • Page 110 Printed in Vietnam 5411 11786 00AD Copyright ©2019 D&M Holdings Inc. All Rights Reserved.
  • Page 111 Play All Your Music Wirelessly The new Denon Home 250 plays all your music wirelessly in stereo with expansive sound. Group other products with HEOS Built-in, such as AV receivers, sound bars and speakers to fill your whole home with music.
  • Page 112 Whether you want to listen to the song for each connected room — the choice is yours. With additional Denon same song or play different songs in each room, the Denon Home 250 lets Home speakers, sound bars, network players or AV receivers with HEOS...

This manual is also suitable for:

Home 150Home 350

Table of Contents