Rear Panel Description; Video In/Out - Doremi V1-HD User Manual

5.3 Rear Panel Description

The V1 rear panel differs from one version to another. V1-HD and V1-UHD have the same rear
panel even if differences can be found dues to optional connectors – e.g., audio expansions:

5.3.1 Video In/Out

SYNC IN
CVBS
SDI
V_1.OM.000160.DRM
Figure 22: Rear Panel
Figure 23: Video In/Out
House Sync input BNC connector for the V1 synchronization
reference – Bi-Level or Tri-level sync input. Locks the V1 to an
external sync source. Sync input should not exceed 1V P-P.
Composite Video Reference Output – Standard Video Resolution.
Serial Digital Interface input and output BNC connectors:
•
"IN-A" is an HD/SD SDI input, whereas "IN-B" is only valid
when the unit is fitted with a dual link. Then A/B corresponds
to the HD-SDI dual link inputs.
•
Without dual link, OUT-A1, OUT-A2, OUT-B1 and OUT-B2 are
HD/SD SDI outputs whereas in case of dual link, A1/B1 and
A2/B2 represent two dual link outputs couples.
Page 27
Doremi Labs, Inc.
Version 5.0