Breville Duo-Temp Pro BES810 series Instruction Booklet page 30

TROUBLEShOOTING PAge heAder.....
PROBLEM
No hot water
Milk is not smooth after
texturing
Machine is not working
30
BES810BSS_ANZ_IB_E14.indd 30
POSSIBLE CAUSES
• Steam Wand is blocked
• Empty tank
• Steam Wand is blocked
• Not enough steam
• Milk is not cold enough
WhAT TO dO
Use the pin on the cleaning
tool to clear the opening. If
the steam wand continues
to be blocked remove the
tip of the steam wand using
the spanner in the middle
of the cleaning tool. Refer
to 'Cleaning the Steam
Wand', page 25.
Fill tank.
Use the pin on the cleaning
tool to clear the opening. If
the steam wand continues
to be blocked remove the
tip of the steam wand using
the spanner in the middle
of the cleaning tool. Refer
to 'Cleaning the Steam
Wand', page 25.
Steam wand may be
blocked. Refer to 'Cleaning
the Steam Wand', page 25.
Use cold fresh milk, refer to
'Texturing Milk', page 20.
The safety thermal cut out
may have activated due
to the pump overheating.
Turn the machine off and
allow to cool for about
30-60 minutes.
27/06/2014 5:26 pm