Removing The Right Alienfx Side-Panel Connector; Prerequisites; Procedure - Alienware Area-51 R2 Service Manual

Removing the Right AlienFX
Side-Panel Connector
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Remove both the left and right side-panels. See
Panels".

Procedure

1 Lay the chassis on the left side.
2
Disconnect the cable that connects the right AlienFX side-panel connector
to the I/O board. See
3
Remove the screw that secures the right AlienFX side-panel connector
assembly to the chassis.
Before Working Inside Your
stability foot.
"I/O Board
Computer. For more safety best
"Removing the Side
Components".
Computer.
45