Page 1
MODEL NUMBER: 40045- 400P-A AUTOMATIC PORTABLE COMPRESSOR IMPORTANT: It is essential that you and any other operator product read understand the contents of this manual before installing and using this product. SAVE THIS MANUAL FOR FUTURE REFERENCE USER MANUAL...
Page 2
SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: • Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs. Do not use this product in an area where it can fall or be pulled into water or other liquids.
Page 3
OPERATING INSTRUCTIONS Please read and follow the operating instructions carefully to assure that you will enjoy the convenience and best use out of your air compressor. IMPORTANT: Always operate the compressor AT OR BELOW THE MAXIMUM PRESSURE RATING of the compressor. Refer to Specifications section of this manual.
Page 4
TIRE INFLATION & DEFLATION IMPORTANT : Before attaching air compressor power clamps to your vehicle’s battery terminals, check to make sure that the ON/OFF switch of your compressor is in the OFF position. Attach the Positive (+) battery clamp (Red) to the Positive terminal of the battery and the Negative (-) battery clamp (Black) to the Negative terminal of the battery.
Page 5
Tire Inflation Gun OPERATION INSTRUCTIONS: This air compressor comes with 1/4” quick connect stud. An extension coil hose and a tire inflation gun are also included with your compressor. Each end of the extension coil hose is equipped with a 1/4” quick connect coupler.
Page 6
SAFETY PRECAUTIONS Always inflate tires manufacturer’s recommended tire pressures. Exercise extreme caution when driving with aired-down tires. Re- inflate tires before high-speed roadway travel. Never exceed 20 M.P.H. when driving with partially-inflated tires. Never make sharp turns while driving with reduced tire pressure.
TROUBLESHOOTING CHART PROBLEM POSSIBLE CAUSE(S) CORRECTIVE ACTION No power, or switch in OFF position Make sure compressor switch is ON Blown fuse Disconnect compressor from power source, replace fuse. (Refer to Specifications section Compressor will not run for correct fuse) Motor overheats Let compressor cool off for about 30 minutes for thermal overload switch reset...
Returns should be made within the time period and conditions of the retailer’s policy for exchanges. If you are unable to contact your dealer, contact VIAIR directly for repairs or replacement at our option.
Need help?
Do you have a question about the 40045-400P-A and is the answer not in the manual?
Questions and answers