Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VIAIR 42046
Summary of Contents for VIAIR 42046
- Page 1 42046 – TLC PRO COMPRESSOR KIT IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL FOR FUTURE REFERENCE USER MANUAL...
- Page 2 TLC PRO COMPRESSOR KIT IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble or attempt to repair or modify unit while it is still connected to the vehicle. - Do not use this product in an area where it can fall or be pulled into water or other liquids. - Do not reach for this product if it has fallen into liquid.
- Page 3 TLC PRO COMPRESSOR KIT OPERATING INSTRUCTIONS Your TLC PRO is powered via the Battery Clips or Terminal Rings, and can be used as a portable or hard- mounted to your vehicle using the respective attachments. To avoid draining your battery and assure the compressor is getting the proper amperage, make sure your vehicle’s engine is running during operation, especially if using for a prolonged period of time.
- Page 4 TLC PRO COMPRESSOR KIT Gauge Quick Connect Stud Quick Connect Coupler *Tolerance: ± 3% Inflation Trigger Bleeder Valve USING THE TLC TIRE INFLATOR 1. Connecting the TLC inflator: Select an inflation attachment and connect it to the TLC Inflator Quick-Connect Coupler. Then, connect the Inflator to an air hose by inserting the Quick-Connect Stud into the air hose coupler. 2. Inflating/Deflating Tires: To inflate, squeeze the Inflation Trigger by pressing it towards the handle of the inflator, this will allow air to flow into the tire. To deflate, press the Bleeder Valve located on the side of the body, this will release air from the tire. 3. Checking Tire Pressure: To check tire pressure after inflation/deflation, simply release the Inflation Trigger or the Bleeder Valve.
- Page 5 For frequent use in dusty environment, we recommend that you replace air filter element at least once a month. c. Regularly clean dust and dirt from compressor cooling fins and/or motor housing. d. Your air compressor is equipped with a permanently lubricated, maintenance-free motor. Never try to lubricate the compressor. e. All repairs should be performed by Manufacturer or Manufacturer’s Authorized Service Agencies only. f. For complete information regarding VIAIR Warranty, please visit: www.viaircorp.com/warranty SPECIFICATIONS 42046 – TLC PRO COMPRESSOR KIT: (CE Certified) Motor Voltage: 12-Volts Max. Current Consumption: 30-Amps...
- Page 6 TLC PRO COMPRESSOR KIT TROUBLESHOOTING GUIDE: PROBLEM: POSSIBLE CAUSE(S) CORRECTIVE ACTION Tank pressure drops when 1. Loose drain cock 1. Tighten drain cock compressor(s) shut off 2. Loose connections 2. Check all connections with soap and water solution and tighten Compressor runs 1. Excessive air usage 1. Decrease air usage continuously and air flow 2. Loose connections 2. Check all connections with lower than normal 3. Worn piston ring or inlet soap and water solution valve.
- Page 7 TLC PRO COMPRESSOR KIT ABOUT COMPRESSOR DUTY CYCLE: Duty cycle refers to the amount of time a compressor can be operated in a given time period at 100 PSI, and a standard ambient temperature of 72° F. It is commonly expressed in percentage format: Compressor on time ÷ (on time + off time) = Duty Cycle %. ONE-HOUR DUTY CYCLE MINUTES ON / MINUTES OFF (100 PSI @ 72°F) 5 Min. On / 55 Min. Off 10% 6 Min. On / 54 Min. Off 15% 9 Min. On / 51 Min. Off 20% 12 Min. On / 48 Min. Off 25% 15 Min. On / 45 Min. Off 30% 18 Min. On / 42 Min. Off 33% 20 Min. On / 40 Min. Off 50% 30 Min. On / 30 Min. Off 100%...
- Page 8 ® VIAIR does not make any representations, warranties or guarantees, express or implied, as to the accuracy or completeness of ® the Manual. Users must be aware that updates and amendments will be made from time to time to the Manual. It is the user’s responsibility to determine whether there have been any such updates or amendments. Neither VIAIR nor any of its directors, officers, ® employees or agents shall be liable in contract, tort or in any other manner whatsoever to any person for any loss, damage, injury, liability, cost or expense of any nature, including without limitation incidental, special, direct or consequential damages arising out of or in connection with the use of the Manual. All third party product names, logos, and brands are property of their respective owners. All company, product service and trademark names are for identification purposes only. Use of these names, logos, and brands does not...
Need help?
Do you have a question about the 42046 and is the answer not in the manual?
Questions and answers