Falcon 960H User Manual page 22

User's Manual
To export the current DVR settings, connect the USB device to the DVR. Highlight Setup – Export... and press the
button. Highlight the box beside File name and press the
name. Selecting Export will save the current settings in .dat file format on the USB device.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
Highlight Show System Log... and press the
The System Log screen lists system activities (up to 5,000 from the latest) that have occurred along with the time and
date. The icon will be displayed in the last column for system activities of the remote site. You can scroll through
the log pages by using the Up and Down arrows, or you can go directly to a log page by entering the log page number
in the box at the bottom left of the screen. Highlight Close and press the
To export the system log information, connect the USB device to the DVR. Highlight Export... and press the
Highlight the box beside File name and press the
Selecting Export will save the log information in .txt file format on the USB device.
NOTE: When opening the saved .txt file, setting to the proper character encoding and using fixed width fonts
will be required to read the file properly.
The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear All Data... and pressing the
you wish to clear all data before the DVR erases the video data. Clear All Data... will not clear the System Log.
14
button. A virtual keyboard allows you to enter the file
button to display the System Log.
button to exit the screen.
button. A virtual keyboard allows you to enter the file name.
button will clear all video data. You will be asked to verify that
button.