Table of Contents
Advertisement
FUTABA 9Z
V
Figure 68 Remove these cables to access LCD panel
3.
Turn the transmitter over and remove and loosen the following Allen key screws
shown in Figure 69.
Figure 69 Remove and loosen these screws (note those already removed in Stage 3, if they
are still present remove them)
4.
Lever up the upper front panel and flip up the LCD panel before carefully levering it
out (it is retained by a plate with lugs on the upper side, see Figure 70 & Figure 71).
WARNING: THE INFORMATION IN THIS MANUAL IS FOR INFORMATION PURPOSES ONLY AND MAY BE INCORRECT, CAUSE DAMAGE
TO YOUR RADIO OR INJURY TO YOURSELF AND OTHERS. IF YOU USE THIS MANUAL YOU DO SO SOLEY AT YOUR OWN RISK.
THE UNOFFICIAL WORKSHOP MANUAL
Page 69 of 84
www.jamesandtracy.co.uk
Copyright 2012 jamesandtracy.co.uk
Advertisement
Table of Contents
