Individual Calls (All Modes Rt) - JRC JHS-770S Instruction Manual

Operation
5 .
5 .
5 .
Start the safety broadcasting using the
handset.
When completed the communications, return
the handset to the cradle.
4.4.1.2

Individual calls (All modes RT)

When sending the safety individual call to a ship or coast station, note the difference described below
from the case of routine.
・ The menu is common for both ship and coast station.
・ Other than the address and the working channel, the type is needed to select.
・ Normally the CH16 by default is used.
■ ■
Procedure
1 .
1 .
1 .
Press , and through hierarchical
MENU
menus, select the 2.1.2 Specific station.
The menu shown at right will be displayed.
If entered previously, the address will be
appeared as a default value
2 .
2 .
2 .
Press ENT to display the station list,
and select the desired station with the
jog dial.
The procedure is similar to that of routine calls,
except that the list shows ship stations first and
then coast stations.
3 .
3 .
3 .
Press ENT.
The cursor will move to the Type.
4-26
Station1 TIME 23:59(UTC)
POS
EXT 179ﾟ59'W
1 6
CH
[ITU]
SQL
CH70
CH
SW
2.1.2)Specific station
Address :[ ]
Type :[All modes RT]
Work CH :[16]
[ OK ] [Cancel]
Station list
NAME MMSI
AAA ocean 123456789
ABB ocean 222222222
ABC ocean 333333333
ACC ocean 444444444
BBB ocean 555555555
Select the initial of the name.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
2.1.2)Specific station
Address :[123456789]
Type :[All modes RT]
Work CH :[16]
[ OK ] [Cancel]
89ﾟ59'S
[A]