JRC JHS-770S Instruction Manual page 46

Operation
4.2.2 Turning OFF the power
■ ■
Procedure
1 .
1 .
1 .
Press PW R and
CONT
After that, the power-off process is activated
according to the controllers' situation.
When using multiple controllers
Select the desired item below on the displayed popup
screen at right.
・ [OK]:
・ [Sleep]:
・ [Cancel]:
When using only one controller
Select the desired item below on the displayed popup
screen at right.
・ [OK]:
・ [Cancel]:
Note
In sleep mode, the controller becomes the following conditions.
・ Only the controller is powered off.
・ The ALM lamp turns green to indicate that the controller is in sleep mode,
・ When receiving a distress call, the controller will be automatically turned on and
activate the alarm if the Wake-up setting in an installation menu is ON,.
・ Even if set the accessible controller to the sleep mode, the access right will not
move from the controller.
4-4
simultaneously.
DIM
Turns off the power.
Sets the controller to sleep mode.
Returns to the previous screen.
Turns off the power.
Returns to the previous screen.
Station1 TIME 23:59(UTC)
POS
EXT 179ﾟ59'W
1 6
CH
OK to power off
the VHF system?
ITU
[OK]
[OK][Sleep][Cancel]
SQL
CH70 CH
SW
Station1 TIME 23:59(UTC)
POS
EXT 179ﾟ59'W
1 6
CH
OK to power off
the VHF system?
ITU
[OK]
[OK] [Cancel]
SQL
CH70 CH
SW
89ﾟ59'S
89ﾟ59'S