JRC JHS-770S Instruction Manual page 73

(3) Receiving an individual call (Type: Position request)
■ ■
Procedure
1 .
1 .
1 .
The screen at right will be displayed, and
the alarm will sound.
The example message contains the following
information.
- Format:
Caller's MMSI:
-
-
Type:
-
EOS:
2 .
2 .
2 .
Press CANCEL
display the screen at right.
respond immediately, press ENT.
Note
- If Automatic ACK is ON, the
acknowledgement will be sent
automatically without notice.
- If having no position information
(unconnected to GPS and elapsed over
23.5 hours after inputting manually),
the message editing screen will be
displayed after selecting the OK/ACK.
(4)
Receiving an individual call (Type: Test)
■ ■
Procedure
1 .
1 .
1 .
The screen at right will be displayed, and
the alarm will sound.
The example message contains the following
information.
- Format:
- Caller's MMSI:
-
Type:
-
EOS:
2 .
2 .
2 .
Press CANCEL
display the screen at right.
respond immediately, press ENT.
If Automatic ACK is ON, the
Note
acknowledgement will be sent
automatically without notice.
Individual call
111222333
Position request
ACK is requested.
to stop the alarm and
If possible to
Individual call
111222333
Test
ACK is requested.
to stop the alarm and
If possible to
Received safety message
Format :Individual call
From :111222333
Type :Position RQ
EOS :ACK RQ
Press CANCEL to silence alarm.
Received safety message
Format :Individual call
From :111222333
Type :Position RQ
EOS :ACK RQ
[OK/ACK] [Cancel]
Received safety message
Format :Individual call
From :111222333
Type :Test
EOS :ACK RQ
Press CANCEL to silence alarm.
Received safety message
Format :Individual call
From :111222333
Type :Test
EOS :ACK RQ
[OK/ACK] [Cancel]
Operation
4-31