Troubleshooting - Sharp LC-15C2HA Operation Manual

TROUBLESHOOTING

Before calling for repair service, check the following items for possible remedies to
the encountered symptoms.
TV set
Problem
Picture
Sound
There is no
picture or
sound.
There is no
Picture
picture.
There is no
picture from
AV-IN1.
There is no
sound.
There is no
picture or
sound, just
noise.
Picture is not
clear.
Picture is light
or improperly
tinted.
The picture is
too dark.
Remote control does not work.
• Make sure the AC adapter is properly inserted in the
power outlet.
• Reception other than those of broadcasting stations
can be considered.
• Make sure the input mode is set to TV.
• Make sure the main power switch of the main unit is
on.
• Make sure the BLACK LEVEL is properly adjusted.
• Fluorescent lamp may have reached the end of
service life.
• Make sure the S-Video terminal is free of connections.
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure the antenna cable is properly connected.
• Bad reception can be considered.
• Make sure the antenna cable is properly connected.
• Bad reception can be considered.
• Check colour adjustment.
(NTSC mode)
• Check if BRIGHTNESS is set to DARK.
• Check CONTRAST and BLACK LEVEL adjustment.
• Fluorescent lamp may have reached the end of
service life.
• Check if batteries in the remote control have sufficient
power.
• Make sure the remote sensor window is not under
strong fluorescent lighting.
Check item
Reference
Pages
6
–
10
10
18, 19
–
25
11
11
6
–
6
–
18, 19
20
18, 19
29
5
5
27