Table of Contents
Advertisement
BASIC OPERATION
Turning on POWER
Control section of main unit
Power/Standby indicator
Switching TV/VIDEO AV1/AV2/COMPONENT/TV Mode
POWER
DISPLAY
SLEEP
BRIGHT
MENU
TV/VIDEO
VOL
CH
-/--
MPX
10
1
Press MAIN POWER, located on
the front side of the main unit to
ON.
2
The Power/Standby indicator
instantaneously changes from red
to green and the main unit is turned
MAIN
on.
POWER
Note:
• Input mode indication disappears after
several seconds.
1
Turn on the power of the con-
nected video equipment.
2
Press TV/VIDEO and select the
applicable input source. The screen
POWER
displays AV1, AV2, COMPONENT
or TV mode at the upper right
corner each time TV/VIDEO is
pressed.
TV/VIDEO
Note:
• AV input mode indication remains for
five seconds.
• AV1: Video equipment connected to
• AV2: AV2 mode is used to adjust
• COMPONENT:
the AV1 input terminals.
An S-video input terminal is
additionally provided for the
AV1 input. If both S-video
terminal and normal video
terminals are connected with
cables, the S-video input
terminal is selected as the
high priority.
the preset settings and IN or
OUT can be selected. AV2
indication is not displayed
when OUT is selected. (For
details on setting AV-OUT,
see page 21.)
Video equipment connected to
the COMPONENT input
terminals.
On-screen display
AV1 mode
I
AV2 mode
I
COMPONENT mode
C O M P O N E N T
TV mode
I
Advertisement
Table of Contents
