Nicam Broadcasts Selection - Sharp LC-15C2HA Operation Manual

NICAM BROADCASTS SELECTION

Enables selection of reception mode when receiving a NICAM signal.
otes:
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
• The setting can be selected individually for each channel position.
22
To let you enjoy NICAM broadcasting, this LCD
TV receives NICAM system stereo, bilingual, and
monaural broadcasts.
Stereo
TV set is receiving a stereo broadcast.
• Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
When MONO is selected, the TV sound is
output in monaural.
Bilingual
TV set is receiving a bilingual broadcast.
• Pressing MPX changes the audio mode in the
order shown on the right.
• M1=main sound, M2=sub sound, or
MONO=monaural sound, can be selected.
Monaural
TV set is receiving a monaural broadcast.
• Each time you press MPX, the mode switches
between NICAM MONO and MONO.
If the sound quality is poor due to a weak signal or
other problems during NICAM broadcast reception,
set the "OFF" position of the NICAM to change the
TV sound to monaural.
1
Press MENU to display the MENU
screen.
2
Press ]/[ to select
"CH-SETTING".
3
Press </> to display the
CH-SETTING menu.
4
Press ]/[ to select "NICAM".
5
Press </> to select "OFF".
When the NICAM sound is set to the
"OFF" position, the TV sound is output
in monaural.
Note:
• When the NICAM sound is set to the "OFF" position, MPX cannot be
used to change the audio mode (stereo and bilingual settings).
49
(When stereo
sound is received)
NICAM
STEREO
49
MONO
49
NICAM
M1
49
NICAM
M2
49
MONO
49
NICAM