Preset; On-Screen Display Language Selection; Presetting The Channels (Auto) - Sharp LC-15C2HA Operation Manual

PRESET

On-Screen Display Language Selection

Front control panel
VOL CH
2 PRESET
3

Presetting the Channels (AUTO)

Front control panel
VOL CH
PRESET
2
2
POWER
DISPLAY
SLEEP BRIGHT
MENU
TV/VIDEO
VOL
CH
-/--
MPX
14
MENU on the LCD TV set can also
be used to select the language.
1
Press MENU on the front of the
TV/VIDEO
LCD TV set for more than two
seconds to display the PRESET
MENU mode screen.
1
2
Press MENU twice to display the
LANGUAGE select mode screen.
Press MENU again to change the
1,2,4
PRESET mode as shown below.
AUTO → MANUAL → LANGUAGE →
Note:
• Instead of pressing MENU for more
than two seconds, you can display the
LANGUAGE select mode by selecting
Menu screen.
3
Press CH (
language you wish to display.
4
Press MENU to return to the
normal screen.
Automatically tunes in and presets
receivable TV stations.
Make sure the antenna cable is
TV/VIDEO
properly connected.
1
Press MENU (PRESET-1) on the
MENU
front of LCD TV set for more than
1
two seconds. The AUTO mode
screen appears.
2
1
Press VOL (+) (PRESET-2) on
the front of LCD TV set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
3
The screen shows whatever is on
MENU channel 1 when full auto channel
preset is finished.
Note:
• When starting PRESET after setting the
SOUND SYSTEM with MENU of the
Remote Control, the SOUND SYSTEM
for all channels are stored into memory.
• Unused channels are automatically
skipped.
• The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
NORMAL
SCREEN
FEATURE → LANGUAGE on the
)/( ) to select the
U H F
4 7 1 . 2 5 M H z
LANGUAGE
ENGLISH
SELECT: EXIT: MENU
(Auto mode screen)
Sound System
U H F
4 7 1 . 2 5 M H z