Disassembly Instrucion - Kenmore 796.29002 Service Manual

4-2. DISASSEMBLY INSTRUCION

Rear Panel
Display PCB
Protect cover
Main PCB
▶ Be sure to unplug the power to repair and replace
electric parts.
ESD (ElectroStatic DIscharge) WARNING
Be sure to follow proper ESD and grounding
precautions for diagnosis and repair. If this is
not possible, touch the ground wire on a regular
basis to remove any static charge built up on
your person.
1) Remove front panel and main PCB
assembly
① Remove 5 panel fixing screws attaching the panel
on the back.
② Disassemble Rear Panel.
③ Pull the front panel forward.
④ Disassemble the protective cover.
⑤ Disconnect the leads from the controller.
⑥ Remove 8 screws on the PCB assembly.
⑦ Disassemble PCB assembly.
21