Kenmore 796.29002 Service Manual page 24

Inner
Tub Cap
4) Disassembly of Tub Cover and Pulsator
① Remove 8 screws and take off the tub cover.
② Remove the pulsator cap.
③ Remove the pulsator screws and take it out.
④ Remove the pulsator washer and take it out.
5) Assemble the service tool (38 mm wrench)
6) Remove the hub attachment nut. (38 mm)
① Hit the bar using the hammer.
Tub Cover
② Disconnect hub fixing nut and disassemble the inner tub.
24
Shaft
Rotor Nut Stator
Hub Attachment Nut
Inner Tub Cap
Hub Fixing Nut
Outer Tub
Inner Tub
Bearing Housing ASM
Rotor